Zowie FK1 will have slightly clickier buttons and be slightly smaller and lighter than your Sensei. Much better sensor as well.

Kana V2 has a very high lift off distance but that can be fixed with a tape trick. It is smaller and lighter still than the FK1.

Zowie EV1 eVo is like the FK1 with a different shape.



I would recommend the FK1 for you since it is most like your Sensei but lighter and with a better sensor. It has no inherent problems from what I read.

I've got the Kana V2 and its really good, came from Deathadder. So i have no problem with the LOD at all.

But i bought Skatez and just put the new skatez on the older ones...now the LoD is pretty low as well, cba to do this tape shit thing.

Only thing i can say: order skatez straight with it (i got CorePad ones), the stock ones really do suck...probably just like on any mice, since theyre not 100% teflon.

What about cm storm xornet?

cm storm xornet : 107 x 75 x 35 mm
kinzu : 117 x 64 x 36 mm
and I said kinzu is small

xornet is much wider tho: http://i.imgur.com/2Ys6s0d.jpg
and needs a different kind of grip.

i actually just put my relaxed hand on it, where i had to use a cramped claw grip with the kinzu.

(removed the DPI buttons and switches for weight reduction, because it only works at 500DPI best anyway :P)

I think my hands are a little longer for xornet
http://i.imgur.com/DXjLSl6.jpg

dont buy a zowie ec1/ec2 unless you have huge hands. look for sizes on zowie mice, they're all pretty much the same but with different shapes/sizes. the new FK1 uses the PMW3310H sensor though, all the other ones have the A3090 which pretty much every wmo ripoff uses now.

id just buy a wmo. zowie is overpriced.