http://trance.gg/Quake-demos/QuakeCon/QuakeCo...20Configs/

Zlive, config porn 2: quakecon 2015 edition?

needs ins

Of course.

What's wrong with Evil's cfg? It's incomplete, completely broken

There's about 5-6 in cyphers, I assume he uses the omg one that's similar ish to Coollers (crosshair wise)?

That's how clever he is... or stoned! :)

If you want to do some cfg testing this might be a good tool to use =)

http://senstool.mikul.se

ty :)

thanks

cm/360 ??

18 cm, hard black steel =]

Who's?

For Cypher there are multiple cfgs in the zip and it's not clear which is actually in use.
from repconfig though he's on fov 93 still, the last sensitivity used is 2.485, 0.018 yaw, so

51.1066398390342 cm /360 base before acceleration if 400 cpi,

he's using cl_mouseAccel ".01"

I never caught up on if people finally decided the wmo was 400 or 450 (edit going with lorfa saying 400)

Cooller fov 90, 0.016 yaw 0.85 sens, and heartless seems to think he's using a zowie ec2 evo cl, they can do 450, 1,150, 2,300 DPI

Interestingly I just noticed he uses cg_weaponconfig_pl to bump fov up to 100 just for that.

he doesn't use accel

450cpi - 149.411764705882 cm/360
1150cpi - 58.46547314578 cm/360
2230cpi - 30.1503561065682 cm/360


edited to throw base fov in for people.

People have been saying Cypher uses Salmosa after his WMO died or whatever. It is 800/1800dpi switchable, so if he used it at 800 dpi the sens seems like something he could use.

Well at 800 that gives him
25.5533199195171 cm that's closer to the ~30cm he seems to have been using before, but that 4.5cm difference would be quite noticeable.

If Cypher deliberately packed several cfgs to confuse people there's every chance he executed random ones as he went along so that repconfig was wrong too.

raphael + koller + eevil plz

cooller's was already in my first post..

I think rapha's on WMO so-

sens 3.8, yaw 0.022, fov 103

400cpi would be 27.3444976076555 cm

he's using cl_mouseAccel ".45"

Evil
sens 2.4, fov 92, zoomfov 45
he doesn't have accel in his cfg, and apparently he's said he doesn't use it.
All I have to go on about his mouse is this thread from 2012 - http://www.esreality.com/post/2350094/evils-mouse-cfg/ saying he's using kinzu v1 which has some positive accel in the sensor.
Same thread claims that 400cpi set on that mouse is actually closer to 560 ..

So, assuming default yaw as that also isn't in the cfg (no repconfig included so accel/yaw could still be set at runtime)

400 cpi = 43.2954545454545 cm
560 cpi = 30.9253246753247 cm

real sensitivity is higher imo, because if cl_mouseaccel > 0 the sensitivity becomes faster, last time i checked ql it behaved like this

You don't compare accelerated sensitivity because you don't have any way of knowing at what speed the player is moving their mouse.

All you can do is take the base sensitivity which you can convert into cm/360 if you know their cpi so it's meaningful to people without having to work that out themselves,

Then if they are using accel give that value, but anyone trying to copy their setup then does still need to know their cpi as accel is still cpi dependant.

^but there is no base sensitivity- as soon cl_mouseaccel is bigger 0, sensitivity becomes much faster. no matter how slow u move the mouse.

easy test: make 360° with accel zero, then set accel 0.1 and move mouse back super slowly -> much shorter way

for example, accel 0.1 shortens my 360° by almost 3cm

Base sensitivity is how it works out when accel IS set to 0.

wmo is 400 dpi. End of story!

Cheers man, I'll trust that, couldn't find a consensus elsewhere. Taking the 450's out the posts then.

From 400ish to 440ish

Never seen a wmo rigorously tested at substantially greater than 400 dpi.

I've never owned a 400dpi wmo :D
I have three of these babies at the moment, they're all around 440dpi with enotus mouse test.

Enotus is terrible. It rounds by a huge amount.

Lorfa, do you know of any Programs that are better I/We could download to test dpi/latency?

Tscherwitschke Mouse Rate Checker maybe?
Someone suggested it to me for some reason ages ago, I only needed to run it once, wouldn't have remembered but I still had the download.

http://tscherwitschke.de/old/mouseratechecker.html

https://www.dropbox.com/s/kozhrnl13om275t/mousewhisperer.exe

Although it's a bit ugly, you can test dpi with this, just use a ruler and confine the motion to a straight line. The timer resets after 300 ms of inactivity.

By latency do you mean click latency? No idea on that. I was under the impression that that could only be tested with modified hardware.

Thank you both of you.

Yes I meant click latency.

I have some DInput tool which is pretty accurate for my other mice. I have one wmo that clocks at 415dpi, and the rest are around 405.

That's within margin of error imo.

Yeah, I'd call that pretty standard too. Mouse settings aren't an exact science, and I like to remind people that you'll probably never get the exact same feel as another player when you use their config.

Did anyone actually see Cypher playing at Quakecon? As in - saw him playing in person? Would be interested to know which config he used from those in his file.

Why does everyone have strange r_windowmode settings?

seta r_windowedWidth "1920"
seta r_windowedHeight "1027"

seta r_windowedHeight "992"
seta r_windowedWidth "1763"

seta r_windowedHeight "789"
seta r_windowedWidth "1402"

seta r_customaspect / new cvar?

It's because, since the standalone wiindowed mode does some auto-adjusting in various circumstances. If you move the window around sometimes its size will change a small bit, and windowedmode will be changed to -1, with odd windowedHeight and windowedWidth numbers.

I don't think customaspect is a cvar anymore, was probably just made with seta.

Are these all of the config files? Didn't Gnomad play for Lift? I didn't see his config in here? Are any others missing?

It is highly upsetting that they missed Gnomad's CFG.

Waited years for this opportunity but no, id hasn't supplied Gnomad's CFG.