ESR - wolfcam-10.0 - Quake Live Forum

<< Comment #1 @ 03:23 CDT, 12 July 2013 >>

(Link, Reply)

By

Vig1lante

Then Wolf Whisperer better update there project then

1%

<< Comment #2 @ 03:40 CDT, 12 July 2013 >>

(Link, Reply)

By

cityy

Hey brugal,
will you add race support when it comes out?

2%

<< Comment #4 @ 04:05 CDT, 12 July 2013 >>

(Link, Reply)

By

skint - Reply to #2

please no 3rd person speed runs!

7%

<< Comment #5 @ 04:34 CDT, 12 July 2013 >>

(Link, Reply)

By

cityy - Reply to #4

For mapping.. :)

8%

<< Comment #13 @ 15:12 CDT, 14 July 2013 >>

(Link, Reply)

By

brugal - Reply to #2

i hope to

6%

<< Comment #3 @ 04:00 CDT, 12 July 2013 >>

(Link, Reply)

By

pa1nk1ller

Yay, new update! Keep up the good work.

<< Comment #6 @ 05:28 CDT, 14 July 2013 >>

(Link, Reply)

By

T1E '

Question to the regulars: Anything to improve on my wolfcam config or encoding chain?

- I want to stay as close to my ingame config as the aesthetics allow, so I will surely keep crosshair, aspect ratio, bright color, r_texturemode
-

backward_vectors = source.MVAnalyse(isb = true, truemotion=true)
forward_vectors = source.MVAnalyse(isb = false, truemotion=true)
source.MVFlowBlur(backward_vectors, forward_vectors, blur=15)

leads unfortunately to a distorted crosshair o_O
any hints?, because 30 fps is too low without :(

Edited by T1E at 05:32 CDT, 14 July 2013

1%

<< Comment #9 @ 13:13 CDT, 14 July 2013 >>

(Link, Reply)

By

melechesh ' - Reply to #6

surprised empy didn't whine you to death

<< Comment #10 @ 13:24 CDT, 14 July 2013 >>

(Link, Reply)

By

T1E ' - Reply to #9

I respect him!

<< Comment #15 @ 15:32 CDT, 14 July 2013 >>

(Link, Reply)

By

brugal - Reply to #6

Try higher values of cg_crosshairAlphaAdjust. Raising it makes the transparent portions of the crosshair less transparent.

8%

<< Comment #22 @ 05:03 CDT, 24 July 2013 >>

(Link, Reply)

By

amalik - Reply to #6

probably should stick to the mme blur in wolfcam instead of external filters! Won't suffer these problems.

14%

<< Comment #7 @ 05:45 CDT, 14 July 2013 >>

(Link, Reply)

By

kevlark

r_drawSun thanks!

<< Comment #8 @ 13:05 CDT, 14 July 2013 >>

(Link, Reply)

By

Legless

cg_fxCompiled doesn't exists: http://i.imm.io/1cold.png
Also 'end' vector is always zero length. :-(

<< Comment #11 @ 14:54 CDT, 14 July 2013 >>

(Link, Reply)

By

MaverickMSG - Reply to #8

cg_drawClientItemTimerIcon doesn't exist either.

<< Comment #14 @ 15:17 CDT, 14 July 2013 >>

(Link, Reply)

By

brugal - Reply to #8

Just tested with Windows XP and it seems to work. The cvar is defined in the cgame dll so it wont be created until you play a demo. Also look in the console to make sure the newer dll is loaded instead of an older one:

Sysl_LoadDll(cgame) found vmMain function at 2D3D2580
CG_Init() version: 10.0

8%

<< Comment #16 @ 18:05 CDT, 14 July 2013 >>

(Link, Reply)

By

Legless - Reply to #14

Tried it while playing demo - everything ok.
Thank you!

<< Comment #12 @ 15:09 CDT, 14 July 2013 >>

(Link, Reply)

By

KittenIgnition

woooooooooooooooooooooooooooooooooooo

11%

<< Comment #120 @ 18:30 CDT, 24 May 2014 >>

(Link, Reply)

By

flocks - Reply to #12

Excuse me, I remember seeing a while back that you enjoy defrag(or maybe it was just strafe jumping) and that you were pretty skilled at it.; regular style, half-beats, etc.

I think you should make a video because A) I love defrag B) I love watching skilled strafers(not just the average t4 derp, but, people that have fun-to-watch movements styles) and C) kittens.

Any chance in this happening? =)

<< Comment #121 @ 18:45 CDT, 24 May 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #120

I dunno what you consider a "video", but I've made a few, only a couple of which were meant for training or w/e.

<< Comment #122 @ 20:50 CDT, 24 May 2014 >>

(Link, Reply)

By

flocks - Reply to #121

Well, I understand strafing and half-beat, etc. I just meant a video that might showcase the kind of things that you're really good at. :P

I'm pretty much always looking for an excuse to watch a non-frag, movement-based video. Whether it's solo defrag, team defrag, etc. :D

<< Comment #123 @ 21:16 CDT, 24 May 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #122

I wouldn't say I'm really good at anything, but I am competent at all sorts of strafe - namely pads and air strafing. I have a few demos of really neat air strafes, but editing is too hard for me. If someone actually WANTS it, maybe that's enough of an excuse? :O

<< Comment #124 @ 21:42 CDT, 24 May 2014 >>

(Link, Reply)

By

flocks - Reply to #123

Up to you, I suppose. =)

I like doing the raztrain_qlbeta3, sometimes. I can never seem to get the last couple of rows. >.<

<< Comment #17 @ 10:46 CDT, 15 July 2013 >>

(Link, Reply)

By

MaverickMSG

A quick render with the item timer icons on the right side (thanks to
pikaluva13 for the demo):

Edited by MaverickMSG at 18:25 CDT, 15 July 2013

7%

<< Comment #150 @ 08:34 CDT, 19 September 2014 >>

(Link, Reply)

By

esdf ' - Reply to #17

does it work with new demo format?

<< Comment #151 @ 12:36 CDT, 19 September 2014 >>

(Link, Reply)

By

MaverickMSG - Reply to #150

Yup. I gave brugal some info about the new protocol and he released the new version (hopefully it helped him). You can submit a demo for rendering and you'll be good to go.

Edited by MaverickMSG at 19:39 CDT, 19 September 2014

<< Comment #154 @ 17:16 CDT, 19 September 2014 >>

(Link, Reply)

By

esdf ' - Reply to #151

great <3 amazing job guys!

<< Comment #18 @ 23:35 CDT, 23 July 2013 >>

(Link, Reply)

By

brugal

support for new quake live update

13%

<< Comment #19 @ 01:26 CDT, 24 July 2013 >>

(Link, Reply)

By

kevlark

How to smooth the pov camera (1st person) in wolfcam? If possible, what the command?

I saw a very smooth films, but my even high-quality offline demos are recorded in wolfcam at : ping 0/sv_fps 125/snaps 125/ cg_maxpackets 125/ g_synchronousclients 1/ rate 25000/com_maxfps 125 - Converted to less smooth video than some smooth films I've seen. So I guess that there is a smoothing function for the POV-camera (1st person)

<< Comment #23 @ 05:25 CDT, 24 July 2013 >>

(Link, Reply)

By

twister - Reply to #19

Can you post an example of a movie you consider very smooth?

<< Comment #24 @ 07:43 CDT, 24 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #23

1) http://www.youtube.com/watch?v=sfwG1zgc0_Q 2) http://www.youtube.com/watch?v=b6_WsDcI_Ww 3) http://www.youtube.com/watch?v=ShyGj6XFMhg

<< Comment #35 @ 11:12 CDT, 27 July 2013 >>

(Link, Reply)

By

pecka_ - Reply to #24

u call this smooth?

i call this smooth: http://www.youtube.com/watch?v=PqgstNbrVkM
1280x720

cvars for motion blur: mme_blurframes, mme_bluroverlap, mme_blurtype.

values of cvars from my video:
cl_aviframerate 30
mme_blurframes 96
mme_bluroverlap 0
mme_blurtype gaussian

yes, it's slow but i've made script to automate the capture proccess.

Edited by uber9petska at 11:23 CDT, 27 July 2013

14%

<< Comment #36 @ 13:22 CDT, 27 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #35

Gaussian blur test - http://www.youtube.com/watch?v=0ey8Eu8TYpw 30fps x 90blur - no smooth

Gaussian nice blur, but bad for smooth motion. Median blur best for smoothing, but less beautiful. Your video is beautiful, but super smooth, it does not.
Extras: smoothness depends on the quality of the demo. If the demo recorded on a bad modem or connection, the smoothness is achieved is difficult. I used q3 demosmooter when try to make a smooth video from the bad demos, but weak result.
I guess that also depends on the smoothness of the codec settings for compression losless video or screenshot.
Smoothness depends on many factors. But everything will be easy, if possible to smooth first-person view. Smoothing the free camera is possible, but the first-person ......

I used q3demosmooter with a very strong smooth settings, so smoothed first-person view - http://www.youtube.com/watch?v=VsAqDwo1MR8 (capture settings - 60fpsx10blur and 30fpsx10bf on rusty-map aerowalk , blurtype - median) . Floating movement and trajectory of heavily distorted.

Edited by kevlark at 20:33 CDT, 27 July 2013

<< Comment #38 @ 16:36 CDT, 27 July 2013 >>

(Link, Reply)

By

pecka_ - Reply to #36

http://www.youtube.com/watch?v=sBslED7zZjo
video quality is too bad even at 720p to judge quality of motion blur. u can edit video with lagarith codec then export final result to uncompressed and then encode for youtube with lossless x264 (-qp 0 option for ffmpeg).

http://www.youtube.com/watch?v=eB-heeckvO4
yeah, mouse movement is heavily distorted. i guess most viewers will find this crappy.

3%

<< Comment #40 @ 17:03 CDT, 27 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #38

I fixed gaus test 30x90 - http://www.youtube.com/watch?v=0ey8Eu8TYpw, (fix comments after 15 min) unfortunately the quality has deteriorated, the first 10 minutes of the quality of 720 was good, but it has now become poor again, so test is not fixed. YouTube to drive me crazy, I do not understand why long video good quality but short spoils. Both video (captured jpeg) http://www.youtube.com/watch?v=MxNxANltpEA and (captured tga) http://www.youtube.com/watch?v=0ey8Eu8TYpw - same converted!!!! TGA is bad for youtube???

I tried lagarith (12gb upload on youtube for this video), but I did not like the quality - http://www.youtube.com/watch?v=3rp3O1heDZk . I use megui and the quality is much better - http://www.youtube.com/watch?v=VsAqDwo1MR8 (preset placebo). I do not understand why you have such a beautiful video on 720p with codec lagarith

Edited by kevlark at 20:34 CDT, 27 July 2013

<< Comment #41 @ 18:07 CDT, 27 July 2013 >>

(Link, Reply)

By

pecka_ - Reply to #40

there is one trick with youtube: if u upload 1080p video then video quality (youtube's encoding) in 720p will be better than if u will upload in 720p.
so full steps are:
1. capture with wolfcam in 720p huffyuv
2. encode huffyuv to lagarith. this makes economy of free space and faster editing.
3. encode final result to uncompressed. this makes easy to compress final result to various codecs via various encoders\tools.
4. encode uncompressed final result to anything u need.

for youtube i use ffmpeg (windows build) with good resizing quality(lanczos) to 1080p:
ffmpeg -i ffa_uncompressed.avi -pix_fmt yuv420p -sws_flags lanczos -vf scale=1920:1080 -c:v libx264 -preset veryslow -qp 0 -b:a 512k ffa.mp4

-preset veryfast gives faster time of encoding and more size. good for high upload speed.
-preset veryslow gives more time of encoding and less size. good for low upload speed.
quality with this preset is same.

4%

<< Comment #42 @ 18:34 CDT, 27 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #41

Thanks, I'll try it

Edited by kevlark at 19:42 CDT, 27 July 2013

<< Comment #44 @ 11:35 CDT, 3 August 2013 >>

(Link, Reply)

By

pecka_ - Reply to #42

just for info:
video 720p 30 fps with WAV is ~35,9 MB/s with ql's captured Huffyuv.
video 720p 30 fps with WAV is ~19,7 MB/s with lagarith (ql's captured Huffyuv encoded to lagarith).
video 1440p 30 fps with AAC is ~21,6 MB/s with x264 "lossless" (upload for youtube test).

Edited by uber9petska at 12:28 CDT, 3 August 2013

<< Comment #43 @ 02:36 CDT, 29 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #35

You video is not have to 144p mode, because uploaded before May.. Unfortunately YouTube has introduced 144p in may 2013, which has worsened the quality in hd mode from any video.Need to show the wonders of editing to get a good quality for the mode 720p now or 1080p upload. Thus YouTube HD quality worsened from as early as the month of May 2013.

<< Comment #45 @ 12:45 CDT, 3 August 2013 >>

(Link, Reply)

By

pecka_ - Reply to #43

check quality. captured at 720p resized to 1440p before upload.
http://www.youtube.com/watch?v=CfWhNv3rcyU&hd=1
may be youtube quality worsened after may 2013 but still watchable and better than ur fixed variant imho.
and yes youtube encoding is not so good as they can.
but now we can use html5 video tag and use own .mp4 or .webm files if can find any hosters or via some free hosting.

and yes original quality set on youtube player makes video quality like i want :) ofc it's 1440p )

Edited by uber9petska at 13:01 CDT, 3 August 2013

1%

<< Comment #47 @ 13:37 CDT, 3 August 2013 >>

(Link, Reply)

By

kevlark - Reply to #45

The quality of your video good in 720p mode, my last video - http://www.youtube.com/watch?v=UTFb8yquBgEhd=1 in 720p mode is worse than yours.Maybe I should also try to download the 1440 or мore work on the color correction in Vegas. My video for a long time switches to 720p, your videos instantly 720p вfter clicking on the youtube link

Edited by kevlark at 13:48 CDT, 3 August 2013

<< Comment #55 @ 10:33 CDT, 24 August 2013 >>

(Link, Reply)

By

Yrx - Reply to #35

Do you know which settings in your wolfcam cfg provide that snappy look of the pov (what i mean is that the moves of the camera are not smoothened out and you see every little movement of the mouse).

<< Comment #56 @ 11:00 CDT, 24 August 2013 >>

(Link, Reply)

By

pecka_ - Reply to #55

i guess it's mme_blurtype gaussian with high mme_blurframes 96 and mme_bluroverlap 0 )

<< Comment #25 @ 18:07 CDT, 24 July 2013 >>

(Link, Reply)

By

brugal - Reply to #19

can you post or send one of those demos?

<< Comment #33 @ 04:45 CDT, 25 July 2013 >>

(Link, Reply)

By

kevlark - Reply to #25

http://rghost.ru/47655947 - demos of this 2) http://www.youtube.com/watch?v=b6_WsDcI_Ww video . Capture cfg of this movie - 60fps 10blur 110fov 1920x1080 (author gave me the settings)

Edited by kevlark at 04:50 CDT, 25 July 2013

<< Comment #32 @ 00:37 CDT, 25 July 2013 >>

(Link, Reply)

By

dreben0202 - Reply to #19

I am interested in this too, why the wolfcams developer ignores the question? But shitty HUD answer immediately ready!

<< Comment #20 @ 02:58 CDT, 24 July 2013 >>

(Link, Reply)

By

KittenIgnition

I probably knew this at one point, but is there any way to solve the massive stutter while seeking? In mme there is no issue going forwards or back, but in Wolfcam going forward is smooth with a low interval setting, but going backwards is really choppy and demolishes my CPU.

The only compromise is having it choppy both ways.

<< Comment #26 @ 18:08 CDT, 24 July 2013 >>

(Link, Reply)

By

brugal - Reply to #20

What cpu is it and how much ram do you have?

<< Comment #30 @ 00:02 CDT, 25 July 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #26

Intel Core 2 Duo w/ 4GB RAM.

<< Comment #50 @ 09:14 CDT, 4 August 2013 >>

(Link, Reply)

By

JS3>* - Reply to #30

lol.

<< Comment #52 @ 12:33 CDT, 4 August 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #50

I'm not the one trying to cap 1080p120w/96blurframes nigga. I don't need a better computer to cap vidyas, as evidenced by my awesome "random df 2: the randoming"

<< Comment #21 @ 03:32 CDT, 24 July 2013 >>

(Link, Reply)

By

illiterate

im noob at this :(

but can someone tell me how to play quake 3 demos in wolfcam?
i get things like cm_loadmap pro-q3dm6.bsp failed or cmod_loadshaders : funny lump size

i did make bat file and put - wolfcamql.exe +set protocol 68

thanks in advance

<< Comment #27 @ 18:17 CDT, 24 July 2013 >>

(Link, Reply)

By

brugal - Reply to #21

Double check that the map was decompressed correctly. The one I have installed is 4360092 bytes and has a2420d9e7c004db25cbea7bc6d871cfc
md5sum. If you want you can email me it and I'll check.

<< Comment #39 @ 17:03 CDT, 27 July 2013 >>

(Link, Reply)

By

system187 - Reply to #21

this is what i have done with v9.11 in order to play q3a demos
it works good enough, no major shader problems with it. im sure someone somewhere will have a better way.

I grabbed the folders Levelshots, Mapobjects, maps, scripts and textures from all q3a pk3s. then placed them in a new pk3 called aa-q3maps.pk3.

now go into scripts(in new pk3 you just made) and delete lighteningnew.shader(we will use QL lightening).

my bat file looks like this

@echo off
start wolfcamql +set protocol "68" +exec q3ademo.cfg

and q3ademo config looks like this

seta r_fullscreen "1"
seta protocol "68"
seta com_qlColors "2"
seta cg_plasmastyle "0"
seta cg_lightningstyle "0"
seta cg_lightningRenderStyle "0"
seta cl_useq3gibs "1"
seta com_blood "1"
seta cg_qlhud "0"

for blood and gibs use this pk3 in wolfcam-ql folder
let me know if you have any issues, hopefully this helps.

Attached Misc File: 95003-z_q3style.pk3 (195KB)

Edited by system187 at 18:26 CDT, 27 July 2013

<< Comment #28 @ 21:48 CDT, 24 July 2013 >>

(Link, Reply)

By

Anonymous (24.77.31.157)

Is there an official forum for Wolfcam? I've been having a HUD issue and haven't been able to find a solution. When I load a custom hud it's not sized properly. The hud is scaled down to about 1/4 of the screen and placed in the top-left. I've tried adjusting both the hud files and looking for some sort of cg_hudScale cvar but have not found a solution. Does this sound like something anyone has encountered?

<< Comment #29 @ 22:59 CDT, 24 July 2013 >>

(Link, Reply)

By

Legless - Reply to #28

Use cg_wideScreen 3.

<< Comment #31 @ 00:04 CDT, 25 July 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #28

Turn off cg_wideScreen and it should be fixed.

<< Comment #34 @ 09:01 CDT, 26 July 2013 >>

(Link, Reply)

By

free

Is it possible to add a fragcounter in wolfcam? Like frags since last death or sth.

<< Comment #37 @ 14:20 CDT, 27 July 2013 >>

(Link, Reply)

By

Legless

Wolfcam crashes with memory errors:
"Z_malloc: Failed on allocation 16777240 of bytes from the main zone".

I think its because heavy shaders/textures.

If I raise com_hunkmegs and com_zonemegs: "WM_Create on cgame failed" or "Failed to allocate xxx megabytes for mme work buffer".

What *megs values should I use?

Win7 x64, 4Gb of RAM.

Edited by NastyWhale at 14:23 CDT, 27 July 2013

<< Comment #46 @ 13:15 CDT, 3 August 2013 >>

(Link, Reply)

By

pecka_

Com_Error(): 1: Failed to allocate 771.285172 megabytes for mme work buffer********************
ERROR: 1: Failed to allocate 771.285172 megabytes for mme work buffer
win7 x64
ram 8gb
swap 0mb

when trying to set 1920x1080 with mme_blurframes 96, mme_bluroverlap 0, mme_blurtype gaussian.
with 1280x720 all ok.
tried without and with 512mb and 4096mb swap file.
same error in 9.X versions
will this error be fixed someday?

Edited by uber9petska at 13:32 CDT, 3 August 2013

<< Comment #48 @ 23:54 CDT, 3 August 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #46

When you buy a new computer, it will be fixed.

5%

<< Comment #49 @ 03:45 CDT, 4 August 2013 >>

(Link, Reply)

By

pecka_ - Reply to #48

who the fuck are you?

3%

<< Comment #51 @ 12:32 CDT, 4 August 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #49

r u drunked?

11%

<< Comment #53 @ 19:45 CDT, 23 August 2013 >>

(Link, Reply)

By

brugal

update 10.2

12%

<< Comment #54 @ 02:11 CDT, 24 August 2013 >>

(Link, Reply)

By

kevlark - Reply to #53

GREAT JOB!

<< Comment #57 @ 06:06 CDT, 28 August 2013 >>

(Link, Reply)

By

dulu

1: it is possible to make a command which describe possible enemies and teammates models? for example:

random choose of models between only : doom, sarge, ranger, bitterman, etc... i can`t stand when someone have james or orbb. Setting this via clientoverride dor over 200 demos is boring.

2: is there a command for demo taker model?
ex: demo was recorded by demo taker - sarge. when i play this demo - demo taker is always doom, not sarge.

<< Comment #58 @ 12:09 CDT, 28 August 2013 >>

(Link, Reply)

By

Legless - Reply to #57

/clientoverride us|mates|enemy

<< Comment #59 @ 20:26 CDT, 28 August 2013 >>

(Link, Reply)

By

brugal - Reply to #57

1) The closest you can get is to use the fx system to issue commands and pick random models for either enemies or teammates (but not both):

randomEnemy {
repeat 33 {
t0 loopcount // 1 - 32 (32 is maximum number of clients)
echo t0
if (rand > 0.5) {
command clientoverride %t0 model doom/bright hmodel doom/bright legscolor 0x00ff00 torsocolor 0x00ff00 headcolor 0x00ff00
} else {
command clientoverride %t0 model tankjr/bright hmodel tankjr/bright legscolor 0x00ff00 torsocolor 0x00ff00 headcolor 0x00ff00
}
}

// in ffa and duel other players are on the same 'team' == TEAM_FREE
if ((gametype != 0) & (gametype != 1)) {
command clientoverride mates model razor/bright hmodel razor/bright legscolor 0xffffff torsocolor 0xffffff headcolor 0xffffff headmodelscale 2.0
}

command clientoverride us model xaero/bright hmodel xaero/bright legscolor 0xffff00 torsocolor 0xffff00 headcolor 0xffff00
}

Add that to your fx file and in wolfcam/cgamepostinit.cfg
add runfx randomEnemy at the end

2) cg_forcePovModel to enable/disable using your values of 'model' and 'headmodel'

Edited by brugal at 20:27 CDT, 28 August 2013

<< Comment #60 @ 05:52 CDT, 29 August 2013 >>

(Link, Reply)

By

dulu

2: how to automate color of my model?

I set /model doom/red, and when i`m in blue team my model is red

<< Comment #61 @ 06:54 CDT, 30 August 2013 >>

(Link, Reply)

By

brugal - Reply to #60

use the model without the skin name:

/model doom

<< Comment #62 @ 07:23 CDT, 30 August 2013 >>

(Link, Reply)

By

dulu

effect
http://img853.imageshack.us/img853/2548/6ta6.jpg

4%

<< Comment #63 @ 15:08 CDT, 9 September 2013 >>

(Link, Reply)

By

Legless

What shader uses cg_drawSpawns? Any way to change it?
http://i.imm.io/1hCWS.jpeg

<< Comment #64 @ 18:24 CDT, 19 September 2013 >>

(Link, Reply)

By

brugal - Reply to #63

It uses the teleport model:

models/powerups/pop.md3

There's currently no way of changing it without also changing the teleport effect.

<< Comment #65 @ 21:08 CDT, 19 September 2013 >>

(Link, Reply)

By

Legless - Reply to #64

Thank you.
I have custom teleport effect via fx-script. :-)

<< Comment #66 @ 03:16 CDT, 29 September 2013 >>

(Link, Reply)

By

kevlark

How to solve this problem?

http://s1.ipicture.ru/uploads/20130929/S7c6S3Oz.jpg

Edited by kevlark at 03:20 CDT, 29 September 2013

<< Comment #67 @ 06:25 CDT, 29 September 2013 >>

(Link, Reply)

By

brugal - Reply to #66

icon offsets still aren't supported with cg_wideScreenHack

<< Comment #68 @ 11:53 CDT, 11 October 2013 >>

(Link, Reply)

By

Legless

Would be cool to have something like
/clientoverride x color 0xff0000 instead of /clientoverride x headcolor 0xff0000 legscolor 0xff0000 torsocolor 0xff0000

Edited by Legless at 11:53 CDT, 11 October 2013

<< Comment #69 @ 07:56 CDT, 19 October 2013 >>

(Link, Reply)

By

kevlark

1) How to reduce the memory limit for the blur? I increased the value to 512MB for the "mme_workMegs" and increased the system ram up to 16 gb, but an error with the closing wolfcam holds the position.
My blur settings work if a screen resolution is 1024x768,if the screen resolution is higher than 1024x768, then an error occurs.

2) How to make the background color black? http://s1.ipicture.ru/uploads/20131019/s3VS6uAo.jpg

3) How to separately capture hud video?

Edited by kevlark at 12:01 CDT, 20 October 2013

<< Comment #70 @ 12:03 CDT, 19 October 2013 >>

(Link, Reply)

By

thuNDa

hmm,

just tested on one demo and already getting two problems:

http://i.imgur.com/Pfk6Vu4.jpg

<< Comment #71 @ 05:33 CDT, 26 October 2013 >>

(Link, Reply)

By

kevlark

1) How to reduce the brightness of gun? http://s2.ipicture.ru/uploads/20131026/EZ5XVmo5.jpg

Edited by kevlark at 16:11 CDT, 27 October 2013

<< Comment #75 @ 05:45 CST, 16 November 2013 >>

(Link, Reply)

By

brugal - Reply to #71

r_ambientScale

13%

<< Comment #72 @ 16:11 CDT, 27 October 2013 >>

(Link, Reply)

By

kevlark

The blur is better in q3mme for smooth look - www.youtube.com/watch?v=FBsswIUUtd8&hd=1 ,but I have not found a way to record ql demos in q3mme. Is it possible to add fully q3mme`s blur features ("mme_blurJitter" "r_framebuffer_blur_samples" "r_framebuffer_blur_amount" "r_framebuffer_blur_size") in the next version of wolfcamql?

<< Comment #73 @ 10:01 CDT, 2 November 2013 >>

(Link, Reply)

By

am1wo

cg_drawInputCmds please!

<< Comment #74 @ 23:39 CST, 14 November 2013 >>

(Link, Reply)

By

Mango.

MAJOR BUG AFFECTING FRAGTV STREAMING OF DEMOS!!!!

This:

* keep demo file in memory to avoid disk usage when rewinding and fast forwarding

Is preventing wolfcamql to play demos as they are being recorded. The demo gets loaded into memory and can not read any new data that gets appended to it.

Edited by Mango. at 03:17 CST, 15 November 2013

<< Comment #76 @ 07:09 CST, 16 November 2013 >>

(Link, Reply)

By

brugal

bug fixes

2%

<< Comment #77 @ 07:48 CST, 16 November 2013 >>

(Link, Reply)

By

zb0t

Wolfcam is dead, I can't fix it, it makes me so sad, I loved using it, and now I gotta use the game itself, or other stuffs (QLDP, QLPrism...).

If someone knows what causes the stutters (screen turns black and white with high contrast and gamma/saturation suddenly when it stops) I would really appreciate.

<< Comment #78 @ 03:49 CST, 22 November 2013 >>

(Link, Reply)

By

rvmble

hi there,
i just wanted to watch some old q3a demos with wolfcam 9.11.
wolfcam telling me "CL_PARSEGAMESTATE: BAD COMMAND BYTE".
my old q3a doenst work anymore so i wanted to watch it with wolfcam .. does anyone know whats the problem here?
thanks.

<< Comment #79 @ 09:59 CST, 22 November 2013 >>

(Link, Reply)

By

rope - Reply to #78

Could it be this?

http://www.quakelive.com/forum/showthread.php...post256374

<< Comment #80 @ 03:15 CST, 24 November 2013 >>

(Link, Reply)

By

aMunster

How do I make the item timers player specific? Twister did it here:

http://www.youtube.com/watch?feature=player_d...XmYqk#t=96

<< Comment #82 @ 07:50 CST, 24 November 2013 >>

(Link, Reply)

By

T1E ' - Reply to #80

I guess you're overthinking it, I'm pretty sure he used 2 pov demos there..

<< Comment #83 @ 10:43 CST, 24 November 2013 >>

(Link, Reply)

By

aMunster - Reply to #82

I have access to those, but don't know how he did it. At the time I linked, Rapha's pov showed RA and YA while Noctis' pov showed mega and both YAs.

<< Comment #84 @ 11:06 CST, 24 November 2013 >>

(Link, Reply)

By

T1E ' - Reply to #83

yes, he probably recorded both demos to video separately and then cut it

<< Comment #85 @ 18:03 CST, 24 November 2013 >>

(Link, Reply)

By

aMunster - Reply to #84

That doesn't quite solve my problem: The item timers in the video don't show similar sets of information. If I use wolfcam to look at a duel from each player's POV, I see an identical situation: full timing information regardless of where the player is on the map. I'd like to mimic Twister's setup, where each POV reflects strictly that player's timing information. Could he have done the item tracking manually?

I'd ask him myself but I don't have enough posts on ESR yet for private messages. Too much lurking...

<< Comment #86 @ 19:36 CST, 24 November 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #85

He has two demos. Each demo has different information. He records the POV from one player, then the other, and switches between them.

I'm very certain that this is a functionality of Wolf Whisperer - it has a VOD system, wherein you select two demos, one from each player in a specific match, and can freely switch between POVs. Due to there being two demos, there will be different information between them.

Edited by KittenIgnition at 19:37 CST, 24 November 2013

<< Comment #87 @ 21:03 CST, 24 November 2013 >>

(Link, Reply)

By

aMunster - Reply to #86

It doesn't look like this is the case.

Wolf Whisperer VODs seem to be only for attaching an mp3 commentary track to a demo, rather than a way to view multiple demos at once. It errors out on me when I combine two demos into a VOD (renamed zip file).

Furthermore, in Wolfcam you can follow the non-demo-recording player as long as they are in range. When I do this, the item timer stays the same (all information) regardless of which player I'm on. The asterisks (who took the item last) do change, however.

Edit: After watching a lot more demos, it looks like it depends on if the demo was recorded with a server set to display all timings to spectators. That was the last hiccup! Now I've got 40 demos queued up to record in wolfcam and later encode in handbrake.

Edited by aMunster at 01:10 CST, 25 November 2013

<< Comment #89 @ 11:38 CST, 25 November 2013 >>

(Link, Reply)

By

T1E ' - Reply to #87

you only get *ALL* item timings as a spectator on a pro spawned server (such as those used in faceit), or from a pov demo when the pov taker is *ALWAYS* near the items when they spawn

<< Comment #88 @ 11:37 CST, 25 November 2013 >>

(Link, Reply)

By

T1E ' - Reply to #86

the video was done before wolfwhisperer was released

<< Comment #90 @ 12:19 CST, 25 November 2013 >>

(Link, Reply)

By

KittenIgnition - Reply to #88

Then I have no idea. All you.

<< Comment #81 @ 05:53 CST, 24 November 2013 >>

(Link, Reply)

By

KittenIgnition

Any chance you could remove the limit on r_znear? A max of 200 does nothing when you're 50,000-100,000 units away from a decal surface.

Also, since I'm going to figure it out myself eventually (or at least some workaround), is there any way to make a player fx trail (player/head/trail) use their own model? I can reference the player model via fx, but it uses the base orientation, which doesn't exactly look that good.

Some help would be much appreciated. If I can get these types of things working, I just might put in the time to figure out wolfcam again, and move away from mme.

EDIT: This is what I'm trying to do. https://dl.dropboxusercontent.com/u/34855518/test.wmv

Edited by KittenIgnition at 15:38 CST, 24 November 2013

<< Comment #95 @ 09:37 CST, 29 January 2014 >>

(Link, Reply)

By

jones_ - Reply to #81

If I remember correctly and nothing has changed since I was more actively scripting I don't think its possible. When I was looking at the source code I noticed what your asking for requires something specifically added to the game code so you can grab the models animations for scripting effects. Without that all you can do is grab the static version of a model which will look pretty silly.

<< Comment #96 @ 17:20 CST, 29 January 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #95

I didn't expect it to be easy, but feature requests are what I do. I really want to come back to Wolfcam, since I've started doing some video editing and even delved into scripting, but it's still just so much worse than mme, despite mme's bugs that will never be fixed.

oh well

<< Comment #91 @ 12:46 CST, 21 December 2013 >>

(Link, Reply)

By

daka '

is there a way to put q4 sounds in wolfcam for ql demos?

<< Comment #92 @ 12:41 CST, 11 January 2014 >>

(Link, Reply)

By

RAGEworthy

Does anyone know how to get Wolfcam to work inside of Quake Live Demo Tools?

<< Comment #93 @ 08:52 CST, 13 January 2014 >>

(Link, Reply)

By

rvmble

can anyone help me with creating the batch file to load wolfcam?
i have done it as mentioned in this thread.
still win7 tells me "cannot find 'wolfcamql'. make sure you typed the name correctly, ...".
version is wolfcam 10.3.

<< Comment #97 @ 17:23 CST, 29 January 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #93

Make sure everything is extracted properly, and you're pointing to the right place. If you really don't know what's going on then take a screenshot of your setup or something.

Though chances are you've already solved this, or don't care anymore, because this is like 2 weeks old :(

<< Comment #100 @ 02:18 CST, 30 January 2014 >>

(Link, Reply)

By

rvmble - Reply to #97

oh i still do care!
the reason is that i wanted to watch some old q3a demos from 2003 and as i read here i have to create a batch file.
so i made a screenshot of the "code" i put in the batch file and the destination of my wolfcam folder.
i dont know what i changed since i posted here, but when i execute the batch file now there is some kind of feedback .. cmd windows are opened endlessly so that i have to reboot my pc (didn't made a screenshot of that).
http://up.picr.de/17208976wn.jpg
thx

<< Comment #101 @ 17:40 CST, 1 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #100

try adding a new line that says pause, which will pause the console. hopefully it won't break your system then and you can see what it's doing. it's never done that to me or anyone else that I know of so that's the only suggestion I have.

<< Comment #103 @ 08:50 CST, 3 February 2014 >>

(Link, Reply)

By

rvmble - Reply to #101

so how does it look like?
like this?

@echo off
start wolfcamql +set protocol 68 +set fs_homepath "D:\wolfcamql" +set r_fullscreen "0"
pause

<< Comment #106 @ 18:51 CST, 10 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #103

Something like that.

<< Comment #99 @ 01:15 CST, 30 January 2014 >>

(Link, Reply)

By

Anonymous (184.90.160.15) - Reply to #93

I've never needed to use any *.bat file. I just unzip wolf to my desktop and run it

C:\Users\xxxx\Desktop\wolfcamql9.1

<< Comment #102 @ 17:41 CST, 1 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #99

to play q3 demos you need some command line stuff.

<< Comment #94 @ 09:29 CST, 29 January 2014 >>

(Link, Reply)

By

jones_

Man I disappear for awhile and I find my 9.2 wc is super outdated.

<< Comment #98 @ 01:15 CST, 30 January 2014 >>

(Link, Reply)

By

Anonymous (184.90.160.15) - Reply to #94

jones.fx

<< Comment #104 @ 09:07 CST, 9 February 2014 >>

(Link, Reply)

By

kevlark

Hi all. How to change the standard reward-medals (exelent,impressive) at my custom medals?

<< Comment #107 @ 18:53 CST, 10 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #104

Either make a new shader (medal_excellent, medal_gauntlet, etc.), and replace the shader name (you can find the shaders in gfx.shader), or just make a new texture in the same directory (menu/medals/medal_excellent.png etc.).

Or you can do like mccormic, and just add them all in post :D

4%

<< Comment #105 @ 16:06 CST, 10 February 2014 >>

(Link, Reply)

By

EmSixTeen

Is there a way to make the UPS counter a bit more similar to QL's cg_speedometer 3?

Also, is there a way to draw the time on the screen for race runs?

<< Comment #108 @ 18:54 CST, 10 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #105

Which one is 3? If that's the one with the little speed graph, then no.

Same goes for timers, unless you're talking about QL. There's no way to add timer support for Defrag, but I don't know how QL fastcaps are handled. Brugal does, though :P

Edited by KittenIgnition at 18:54 CST, 10 February 2014

<< Comment #109 @ 04:52 CST, 11 February 2014 >>

(Link, Reply)

By

EmSixTeen - Reply to #108

3 is the small number under the crosshair.

<< Comment #110 @ 16:43 CST, 15 February 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #109

You'll just have to manually align the text, via cg_drawSpeedX/Y. With cg_wideScreen 0, it should be something like 320/250, but with the widescreen hack enabled it will depend on your resolution.

<< Comment #111 @ 12:31 CST, 25 February 2014 >>

(Link, Reply)

By

Anonymous (204.9.149.117)

Hey guys, I'm using 10.3 and I can't seem to get the configuration to load. it says the default is the one I want, but it doesn't appear to work in game. I'm using kittenignition's configuration. help?

<< Comment #112 @ 07:05 CDT, 11 March 2014 >>

(Link, Reply)

By

kevlark

How to enable vsync for video capturing? I turned on the vsync in drivers and com_maxfps limited to 60, but it has no effect on the captured video so Video still unstable

Edited by kevlark at 07:08 CDT, 11 March 2014

<< Comment #113 @ 07:28 CDT, 11 March 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #112

Why in the world would you want v-sync on for captured video? Do you even know what it does?

<< Comment #114 @ 07:40 CDT, 11 March 2014 >>

(Link, Reply)

By

kevlark - Reply to #113

I'm not sure that it vsync, but some people have said that my movies are unstable for look and lacks vsync.

My video will unstable and heavy for look
for all values of blur and aviframerate - http://www.youtube.com/watch?v=EYccBXF0ImU
This video is easy for look and stable, maybe it's the result of vsync - http://www.youtube.com/watch?v=b6_WsDcI_Ww and http://www.youtube.com/watch?v=ShyGj6XFMhg

Edited by kevlark at 07:42 CDT, 11 March 2014

<< Comment #115 @ 07:47 CDT, 11 March 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #114

Saddened by the fact that I cannot watch Youtube videos on this computer. Maybe another time, should your question remain unanswered. Sorry I could not be of assistance.

9%

<< Comment #116 @ 07:56 CDT, 12 March 2014 >>

(Link, Reply)

By

AnthonyJ

Suggestion (for which I may/may not create a patch):

Rather than requiring users copy the contents of the QL\baseq3\ folder into the wolfcam folder, wouldn't it be better to add a cvar fs_qlpath which defaults to %appdata%\idSoftware\QuakeLive\baseq3 (or ~/ equiv for linux), and add that path into the searchpaths?

<< Comment #117 @ 14:57 CDT, 30 April 2014 >>

(Link, Reply)

By

kevlark

How to switch off voice of pov sounds?

Edited by kevlark at 14:59 CDT, 13 May 2014

<< Comment #118 @ 13:30 CDT, 23 May 2014 >>

(Link, Reply)

By

pecka_

Is it possible to speed up demo playing to maximum? With com_maxfps 0 and timescale 99999 20 min demo played in 1-2minutes. While playing demo with this settings CPU load is 25-30% and GPU load is 5-10%. Can it be faster? I need only to dumpconsole after demo to parse chat messages after. I need it for thousands demos :)

<< Comment #119 @ 13:55 CDT, 23 May 2014 >>

(Link, Reply)

By

pecka_ - Reply to #118

it's possible if set com_timescalesafe 0. 3-5 seconds instead 60-120. only needs to check is there any lost info at dumps.

<< Comment #126 @ 21:31 CDT, 11 June 2014 >>

(Link, Reply)

By

Yakumo - Reply to #118

That's a silly way to do it if you only need one though, when you can just pull the chat using qldt

select demo
tools -> edit
"save as" - select chat log in the file dialog drop down.

wish it had command line options for that then you could script it :/

Edited by Yakumo at 21:32 CDT, 11 June 2014

<< Comment #127 @ 02:08 CDT, 12 June 2014 >>

(Link, Reply)

By

pecka_ - Reply to #126

>> That's a silly way to do it if you only need one though, when you can just pull the chat using qldt
I guess you didn't notice last sentence: I need it for thousands demos :)
I already did it half-automated with qldt and wolfcam-ql (needs com_timescalesafe 1 for correct timestamps).

Edited by pecka_ at 02:08 CDT, 12 June 2014

<< Comment #128 @ 08:56 CDT, 12 June 2014 >>

(Link, Reply)

By

Yakumo - Reply to #127

I did, hence my last sentence :)
I was hoping for a way you could script it, I posted on the UBERDEMOTOOLS! thread requesting that function but I don't have high hopes the author of the tools only posted anonymously.
The source for that is available though, so if you know anyone that can compile .net they could build you something that would do it for you fairly easily.

Edited by Yakumo at 08:57 CDT, 12 June 2014

<< Comment #129 @ 09:09 CDT, 12 June 2014 >>

(Link, Reply)

By

Yakumo - Reply to #128

I just thought, you should use logging instead of dumpconsole, or you might lose some to the display limit, also less manual work.

set g_logsync "1" // I *think* this is boolean in wolfcam so jsut 1 to append file, 0 to overwrite.
in some other games it's 0=no log, 1=buffered, 2=continuous, 3=append

set logfile "1" // 0 = no log, 1 = log enabled
set g_log "mylog.txt" // filename

then you can just open the file and use regex to remove any line that doesn't have < followed by > or whatever message it uses for loading the next demo, and you'd have all chat.

<< Comment #125 @ 20:22 CDT, 11 June 2014 >>

(Link, Reply)

By

rehepapp

Whenever I try to record something with the cfg below it records audio only for 6 seconds and 150 ms maximum. If I use the default cfg everything is fine. Anyone know what could it be?

http://pastebin.com/khCKzPkk

<< Comment #130 @ 12:36 CDT, 31 August 2014 >>

(Link, Reply)

By

8952341

anyone know if they are updating this?

its broke since the ql update :x

<< Comment #131 @ 13:18 CDT, 31 August 2014 >>

(Link, Reply)

By

cez_ - Reply to #130

bump yeah, this is a serious issue :(

1%

<< Comment #132 @ 13:22 CDT, 31 August 2014 >>

(Link, Reply)

By

sophia

maybe if we all 'donate a dollar' it will be done quicker

13%

<< Comment #135 @ 07:50 CDT, 1 September 2014 >>

(Link, Reply)

By

zb0t - Reply to #132

I'm in, contact him, come back with him here with statement and paypal, let's got wolfcam updated! ='D

<< Comment #133 @ 02:46 CDT, 1 September 2014 >>

(Link, Reply)

By

Anonymous (83.255.105.185)

I just tried to use Wolfcam for the first time. When I try to play a demo everything loads but just when you expect the demo to start it just stay at "awaiting snapshot". Then nothing happens.

<< Comment #134 @ 07:43 CDT, 1 September 2014 >>

(Link, Reply)

By

Yakumo - Reply to #133

QL just updated the protocol, so demos are different now and wolfcam can't load them.
You can only load old demos in it until it gets updated.

<< Comment #136 @ 07:23 CDT, 11 September 2014 >>

(Link, Reply)

By

brugal

test version that plays the new demos if you need it:
http://sourceforge.net/projects/wolfcamql/fil...p/download

quake3 and older quakelive demo play is still broken though

57%

<< Comment #137 @ 08:00 CDT, 11 September 2014 >>

(Link, Reply)

By

Yakumo - Reply to #136

Awesome, thank you for working on this!! :)

I know QBall147 was having a go at this and got some info on the protocol changes, maybe he can be of some help (he's always on quakenet irc)

I've had some success with BOTH a baseq3 dir from the old pre august patch QL, AND the non XOR'd new baseq3 folder with dm90 demos.

Playing dm90 demos the players seem to be messed up, I'm listed as being in game by the scoreboad when I was spectating, and doing /follow 0 (my id) just ends with a stream of "CG_GetValue() unknown ownerDraw 2" (or 6) in the console.

Playing dm78 demos with either the old XORd pk3s or the non XOR'd pk3's does not work, I either get error messages, or WolfcamQL just crashes.

Placing the zip file in Wolf Whisperers upgrade folder did successfully upgrade WW for me too, thanks :)

Edited by Yakumo at 08:01 CDT, 11 September 2014

<< Comment #140 @ 17:12 CDT, 12 September 2014 >>

(Link, Reply)

By

brugal - Reply to #137

could you send or post the demo?

<< Comment #141 @ 17:18 CDT, 12 September 2014 >>

(Link, Reply)

By

Yakumo - Reply to #140

Not until Sunday or Monday now I'm away from home, sorry :/

<< Comment #146 @ 07:07 CDT, 19 September 2014 >>

(Link, Reply)

By

Yakumo - Reply to #140

Here's one that shows the problem still ( in wolfcam 11 test 2)

http://www.fileswap.com/dl/lXtPv5XeL7/iFFA-as...9.zip.html

<< Comment #155 @ 14:42 CDT, 20 September 2014 >>

(Link, Reply)

By

MajkiFajki - Reply to #146

Got same stuff - test2. Not even heatlh/armor values are displayed.

<< Comment #138 @ 13:28 CDT, 11 September 2014 >>

(Link, Reply)

By

NastyTime - Reply to #136

Big thanks for this release.

New demos: so far my config used in earlier versions works fine and I can even cut demos. The only thing what I noticed so far is strange team vote message even though no one called it and it happens only if I'm demo taker and camera follows my point of view. If I spectate someone from his/her point of view and take demo, everything is fine.

http://i263.photobucket.com/albums/ii156/mgyp...5dd5b4.jpg

======================================

Old demos: Wolfcam starts to play demos and after a 1-2 seconds returns this message:

http://i263.photobucket.com/albums/ii156/mgyp...9b7a01.jpg

<< Comment #139 @ 17:11 CDT, 12 September 2014 >>

(Link, Reply)

By

brugal

this version has crash fixes, support for older quake live demos, and it automatically detects protocol so there's no need for the command line option to play quake3 demos

http://sourceforge.net/projects/wolfcamql/fil...p/download

70%

<< Comment #142 @ 17:30 CDT, 12 September 2014 >>

(Link, Reply)

By

zb0t - Reply to #139

Sick! Thanks!

<< Comment #143 @ 13:16 CDT, 13 September 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #139

Reading that changelog brought a tear to my eye! You finally added two huge features that I've been wanting for a long, long time: automatic protocol detection of demos, and fx trail model-loading inheriting the player's current animation state. Soooo fucking cool! I love you! My hero!

Now all we need is an orthographic rendering method, and everything will be perfect ;)

Edited by KittenIgnition at 13:34 CDT, 13 September 2014

<< Comment #147 @ 07:40 CDT, 19 September 2014 >>

(Link, Reply)

By

wntt - Reply to #143

hey, where's the changelog of the latest version?

<< Comment #149 @ 07:47 CDT, 19 September 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #147

Inside the zip archive. It's called version.

<< Comment #145 @ 07:03 CDT, 19 September 2014 >>

(Link, Reply)

By

Yakumo - Reply to #139

had a dm73 demo I double clicked, it was copied by wolfwhisperer into

\Wolf Whisperer\wolfcamql\wolfcam-ql\demos

where it gets listed under 'My Demos' in the UI.

and it wouldn't play. (I know you don't work on wolf whisperer but it seems there's some path system it used to work with wolfcam that now doesn't)

If I copied the file into
%AppData%\..\LocalLow\id Software\quakelive\home\baseq3\demos

then it played *even though I was clicking on it from the same place*

so it seems wolfcam is taking the demo name from the input from wolfWhisperer, but not reading the path its been sent by WW and instead only trying to read from the QL baseq3 dir under appdata.

Edited by Yakumo at 07:56 CDT, 19 September 2014

<< Comment #148 @ 07:46 CDT, 19 September 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #145

I don't know if "/demo" looked in the QL directory before, but it does now. It autocompletes QL demos, rather than Wolfcam demos, which maybe can or can't be changed?

Try fs_quakelivedir, that should force it to look somewhere else for QL files, thus QL demos. Obviously, it will make it so you can't load demos from your real QL dir.

Edited by KittenIgnition at 07:47 CDT, 19 September 2014

<< Comment #144 @ 12:21 CDT, 18 September 2014 >>

(Link, Reply)

By

Legless

I have troubles with hud in 11.0test2: http://i.imgur.com/rENjd5n.png.

Just replaced old 10.3 binaries with new ones.
/cvar_restart didnt help.

Also, how to remove this flag icon? :>
http://i.imgur.com/QZLBJQc.png

<< Comment #152 @ 12:38 CDT, 19 September 2014 >>

(Link, Reply)

By

MaverickMSG - Reply to #144

I saw the same issues with the hud and I solved them by deleting all the ql pk3 files in wolfcam's baseq3 and redownloading them.

9%

<< Comment #157 @ 15:52 CDT, 20 September 2014 >>

(Link, Reply)

By

Legless - Reply to #152

Already tried to replace all QL pk3-s.
But I have some custom ones (texture/model/shader only, no ui/ folder in them).

Edited by Legless at 15:52 CDT, 20 September 2014

<< Comment #165 @ 08:24 CDT, 2 October 2014 >>

(Link, Reply)

By

Lacceh - Reply to #152

this works, thank you!

<< Comment #194 @ 15:31 CST, 22 December 2014 >>

(Link, Reply)

By

earth - Reply to #144

I don't know any cvar or fx that causes this, but you can hack it by making a blank image to override the flag icon :p

wolfcam-ql\sprites\flagcarrier.png

<< Comment #153 @ 13:06 CDT, 19 September 2014 >>

(Link, Reply)

By

Anonymous (83.26.11.160)

http://imgur.com/PrJ42eG,Q7ZGgTI#1
I have problem with console and hud somebody can tell me how to repair this?

<< Comment #156 @ 15:32 CDT, 20 September 2014 >>

(Link, Reply)

By

sophia - Reply to #153

i have this problem too there console is going wild with this message.

<< Comment #158 @ 13:59 CDT, 23 September 2014 >>

(Link, Reply)

By

sophia - Reply to #156

anyone maybe have an idea to fix this? i was wondering if maybe loading a different config would help? idk.

<< Comment #160 @ 09:58 CDT, 24 September 2014 >>

(Link, Reply)

By

earth - Reply to #153

yip

<< Comment #159 @ 15:33 CDT, 23 September 2014 >>

(Link, Reply)

By

Fragmasterr

suxx, all huds are broken for me and i get that error message, even on normal huds.

http://www.mute.tv/upload/files/Fragmaster/fail.jpg

thats what i get trying to use my custom hud

<< Comment #161 @ 19:19 CDT, 25 September 2014 >>

(Link, Reply)

By

Legless - Reply to #159

Delete all pak*.pk3 and copy new from ql's folder.

<< Comment #164 @ 05:01 CDT, 2 October 2014 >>

(Link, Reply)

By

MajkiFajki - Reply to #159

cg_qlhud 0 for now, until stuff gets fixed

<< Comment #162 @ 09:02 CDT, 27 September 2014 >>

(Link, Reply)

By

user38662

I click on wolfcamql.exe and nothing happens.

<< Comment #163 @ 04:09 CDT, 2 October 2014 >>

(Link, Reply)

By

Lakitu

"recursive error after 1: Failed to allocate -397.078110 megabytes for mme work buffer"

Does anyone know how to fix this?

<< Comment #166 @ 09:11 CDT, 2 October 2014 >>

(Link, Reply)

By

Legless - Reply to #163

mme_blur* 0?

<< Comment #167 @ 11:11 CDT, 2 October 2014 >>

(Link, Reply)

By

Lakitu - Reply to #166

yeah lol, thanks

<< Comment #168 @ 03:55 CDT, 4 October 2014 >>

(Link, Reply)

By

brugal

support for new voice announcer and bug fixes

http://sourceforge.net/projects/wolfcamql/fil...p/download

45%

<< Comment #172 @ 04:58 CDT, 7 October 2014 >>

(Link, Reply)

By

MajkiFajki - Reply to #168

Changelog and stuff? Also - thanks!

<< Comment #169 @ 03:58 CDT, 4 October 2014 >>

(Link, Reply)

By

brugal

For the test versions you have to use the latest quakelive pak*.pk3 files. The sep update changed the ordering/number of the menu definitions so using older quake live paks is going to lead to random items being drawn in the hud.

Edited by brugal at 03:59 CDT, 4 October 2014

16%

<< Comment #170 @ 06:52 CDT, 5 October 2014 >>

(Link, Reply)

By

Anonymous (184.90.178.197)

Using 11.0test 3 with quakelive latest *.pk3 file and getting this error in console and square boxes on impact.

0:41 FIXME EV_DAMAGEPLUM

<< Comment #171 @ 07:10 CDT, 5 October 2014 >>

(Link, Reply)

By

Yakumo - Reply to #170

The 'FIXME' is a clear indication that it's a problem he knows about and has marked to fix in a later build.

<< Comment #173 @ 10:23 CDT, 24 October 2014 >>

(Link, Reply)

By

bobwinters - Reply to #171

People.. lol.

8%

<< Comment #174 @ 01:44 CST, 11 November 2014 >>

(Link, Reply)

By

illiterate

anyone know how to fix the.

fixme ownerdrawflag2 0x00004000

<< Comment #178 @ 05:24 CST, 8 December 2014 >>

(Link, Reply)

By

Yakumo - Reply to #174

See #176

You're welcome to fix it for everyone if you want to download the wolfcam source code and get programming though ;)

<< Comment #175 @ 22:01 CST, 15 November 2014 >>

(Link, Reply)

By

Legless

Can some1 help me? Looks like "color" blocks in fx have no effect on models color.

So, I have a md3 and shader with "rgbGen vertex". When displaying model with fx script, it is always yellow, but according to code must be blue. Happens with default rail explosion (models/weaphits/ring02.md3) as well, didnt checked other ones.

http://i.imgur.com/OOBhRCR.png
http://pastebin.com/Rx0v55Gx

With "rgbGen identity" it displays texture in white color.

Edited by Legless at 22:10 CST, 15 November 2014

<< Comment #176 @ 19:02 CST, 18 November 2014 >>

(Link, Reply)

By

Legless

Any ways to get player dir in /weapon/*/flash?

Can't use /fire event, it gives wrong origin if player moves fast.

<< Comment #177 @ 03:32 CST, 8 December 2014 >>

(Link, Reply)

By

qwih

invalid entitystate fieldcount 200
numfields 53

any idea how to solve this when i launch a map?

<< Comment #181 @ 06:40 CST, 8 December 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #177

Sounds like an old version. Download 11b3 from Sourceforge.

<< Comment #183 @ 13:19 CST, 8 December 2014 >>

(Link, Reply)

By

qwih - Reply to #181

thanks )))) update from the website the last version then ;P

Edited by qwih at 13:19 CST, 8 December 2014

<< Comment #179 @ 06:16 CST, 8 December 2014 >>

(Link, Reply)

By

gienon

Yo, quick question.

I've noticed that whenever I try to play a demo on a biggish map (overkill, vietnamese castles), I get the hunk_allocatetempmemory error. I've played around with hunkmegs but they seem to be stuck at 56 (the console says "latched 2048" but vid_restart doesn't set them to 2048 or any other value for that matter). Help.

I'm using the 11.3 version and I have 8GB of ram.

<< Comment #180 @ 06:39 CST, 8 December 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #179

You can't set hunkmegs (or any megs) ingame, you need to set it in the command-line. Check the thread on the Quake Live forums to see how to do that, if you don't already know.

<< Comment #182 @ 06:58 CST, 8 December 2014 >>

(Link, Reply)

By

gienon - Reply to #180

Thanks. It works.

<< Comment #184 @ 23:27 CST, 8 December 2014 >>

(Link, Reply)

By

illiterate

anyone know how to fix - fixme ev_damageplum

its flooding console hectically. im using wolfcam 11 test3

<< Comment #185 @ 14:56 CST, 10 December 2014 >>

(Link, Reply)

By

AsphyxEvents

Thanks Legless for the information about the hud fix !

Deleted all pak*.pk3 from the wolfcam/baseq3 and copy the paks new from the quakelive folder.

IT IS FIXED? Yeah it is!

Thanks Brugal for the new announcer support and bug fixes
( specially for the automatic protocol detection of demos )

<< Comment #186 @ 19:31 CST, 13 December 2014 >>

(Link, Reply)

By

kevlark

How to make animated rewards medal? It possible? I have png Sequences frames with transparency, 50 frames for medal exelent,impressive,gauntlet, but I do not know how to use it to config wolfcam. Wolfcam support gif or avi aanimation format with transparency for medals or image format only support?

Edited by kevlark at 19:32 CST, 13 December 2014

<< Comment #187 @ 20:23 CST, 13 December 2014 >>

(Link, Reply)

By

KittenIgnition - Reply to #186

Modify the current clampmap shader with animmap, something like this:

medal_excellent
{
nopicmip
{
animmap 8 kitteh/excellent/excel_1.tga kitteh/excellent/excel_2.tga
blendfunc blend
alphaGen vertex
}
}

etc. etc. Once you've made shaders for all of your medals, save this as whatever.shader and put it in your shaderoverride folder (wolfcam-ql/shaderoverride/), and put the images in the appropriate folders (wolfcam-ql/kitteh/excellent, wolfcam-ql/kitteh/impressive, ...).

I think some blend methods don't work with animmaps, or animmap requires a specific blend or gen func, but I don't remember what it is, if any. I didn't test this shader.

P.S. If you want to look for the names of all the shaders, the medals are in gfx.shader

Edited by KittenIgnition at 20:24 CST, 13 December 2014

7%

<< Comment #188 @ 00:59 CST, 19 December 2014 >>

(Link, Reply)

By

julios

having major issues getting demos to play with wolfcam. I've followed the installation instructions, but when I try to load a demo, it seems to load all the items on the map, but hangs at the loading screen for about 20 seconds and then quits to desktop.

I can run .dm_73, but .dm_90 not working.

running wolfcam 10.3

also, the map texture doesn't load - it just shows the missing texture image instead of the map image on loading screen. This happens for all demos, whether or not they eventually load.

Any ideas?

edit: nm, works with the 11.0 test 3 version :)

Edited by julios at 01:04 CST, 19 December 2014

<< Comment #189 @ 07:53 CST, 22 December 2014 >>

(Link, Reply)

By

gienon

Hi, I've ran into an issue. When I try to load up any fx file, I get the following error:

Freed 0.mb for jit fx tokens
Failed to open fx file "fx.fx"

Any solutions? Thanks in advance.

edit: Aaand one more question - how do I make the overhead rewards on my enemies/teammates disappear?

version 11 test3

Edited by gienon at 07:59 CST, 22 December 2014

<< Comment #190 @ 14:18 CST, 22 December 2014 >>

(Link, Reply)

By

Legless - Reply to #189

> edit: Aaand one more question - how do I make the overhead rewards on my enemies/teammates disappear?

Add this to your fx file.
http://pastebin.com/fWgD6MiH

<< Comment #193 @ 15:27 CST, 22 December 2014 >>

(Link, Reply)

By

gienon - Reply to #190

Thanks. Of course it works ;)

<< Comment #191 @ 15:15 CST, 22 December 2014 >>

(Link, Reply)

By

earth - Reply to #189

where is your fx.fx file located? It's probably in wolfcam-ql/scripts, in which case you should make sure you've included scripts/ i.e.

cg_fxfile "scripts/fx.fx"

<< Comment #192 @ 15:27 CST, 22 December 2014 >>

(Link, Reply)

By

gienon - Reply to #191

It was as simple as that. Thanks ;)

<< Comment #195 @ 15:34 CST, 22 December 2014 >>

(Link, Reply)

By

earth - Reply to #192

Glad to help, it happens :)

<< Comment #196 @ 03:13 CST, 1 January 2015 >>

(Link, Reply)

By

kevlark

I have problem with cg_simpleItems "1" http://hostingkartinok.com/show-image.php?id=...9a6bd067fa - Some icons are visible through the wall

<< Comment #197 @ 13:47 CST, 2 January 2015 >>

(Link, Reply)

By

Lam |

Hey, jumpTime/doubleJumped aren't needed in entityStateFields.

<< Comment #198 @ 16:38 CST, 17 January 2015 >>

(Link, Reply)

By

klz

I have done everything as the description says when installing but for me it crashes when it is loading a map straight after loading players. Any idea why is this happening?

Edited by klz at 04:50 CST, 18 January 2015

<< Comment #321 @ 10:27 CDT, 28 July 2015 >>

(Link, Reply)

By

pz - Reply to #198

same problem here, windows 8.1.
I had no problem on 7 with wolfcam 9 some months ago.

I just tried everything and WW doesn't help either. It loads itrems and players, then crashes...

<< Comment #323 @ 02:26 CDT, 29 July 2015 >>

(Link, Reply)

By

brugal - Reply to #321

what version are you using? also, could you check the files in the %APPDATA% wolfcamql directory to see if there's crash information (stderr.txt, cgameboot.log, etc..) ?

<< Comment #326 @ 06:59 CDT, 29 July 2015 >>

(Link, Reply)

By

pz - Reply to #323

Version 10.3

Here is my cgameboot.log: http://pastebin.com/4YkgNraY

<< Comment #331 @ 11:00 CDT, 29 July 2015 >>

(Link, Reply)

By

pz - Reply to #323

By the way I just tried wolfcam 11 test with 2015 qcon demos, it works like a charm.

<< Comment #199 @ 17:33 CST, 31 January 2015 >>

(Link, Reply)

By

kevlark

how to reduce the brightness of the railgun glow?

http://i59.tinypic.com/1z1s4ye.jpg

Edited by kevlark at 17:35 CST, 31 January 2015

<< Comment #200 @ 04:52 CST, 26 February 2015 >>

(Link, Reply)

By

kobe_08

Hi all! I use to know how to loop demos, but now I don't. I guess not being around for a while, you sort of lose touch with how things work. If someone here could please post a script for looping one demo and one for looping 4 demos, that would be great!

I have nothing against VODs, but watching demos in high quality is better than watching TV in most cases! Treat me like a newbie and make the scripts a copy and paste type thing, so all I have to do is replace the "demo here" with the name of the demo(s) I'll be using. Again, thanks in advance for all your help!

By the way...I tried using Wolf Whisper in the hope it would do what I want, which is to loop demos. Everytime it opens up Wolfcam, it pauses and then crashes once the demo attempts to load. Anyway, I'll be happy again just to loop from Wolfcam, thank you!

<< Comment #201 @ 06:22 CST, 26 February 2015 >>

(Link, Reply)

By

earth - Reply to #200

WW is not updated for recent versions of WC, so it won't work.

<< Comment #202 @ 06:55 CST, 26 February 2015 >>

(Link, Reply)

By

Yakumo - Reply to #201

works fine for me, all I did was install WW, then put the 11beta3 zip file in the update folder as normal.

1%

<< Comment #203 @ 07:56 CST, 26 February 2015 >>

(Link, Reply)

By

kobe_08 - Reply to #202

I realized I was doing that all wrong and it does indeed work. Having said all that, I don't seem to be able to loop with WW...so if you have a script for WC, please post it?! :)

You guys are truly amazing by the way...keep up the good work!

<< Comment #205 @ 11:46 CST, 26 February 2015 >>

(Link, Reply)

By

earth - Reply to #203

Identify the times of the demo you want to loop within using /servertime, then:
/setloopstart <start time>
/setloopend <stop time>

Alternatively:
/loop <start time> <stop time> - same as above but in one cvar

Then:

/loop - toggles looping within time boundaries on and off

I'm not sure how to loop multiple demos, but it's definitely possible. Would be useful to loop a folder of demos and record each. Someone will know...

1%

<< Comment #206 @ 09:09 CST, 27 February 2015 >>

(Link, Reply)

By

kobe_08 - Reply to #205

I tell you what earth_quake, brugal sent me instructions on how to loop as many videos as I wanted and it actually worked! I forgot how I used it so that is why I'm asking someone to post exactly how it goes. As I said, I forgot how to do a lot of stuff and it is irking me to no end! Anyway...take this and use it well! I use to use it to loop as many demos as I wanted and I'm sure you'll figure out how. When you do, send me a PM on just how you got it to work.

in wolfcam-ql/loop.cfg:

//-------------------------
// demo looping
set doit "demo tdm.dm_73; set nextdemo vstr doit"
set nextdemo "vstr doit"
demo tdm.dm_73
//-------------------------

then
/exec loop.cfg

<< Comment #208 @ 11:15 CST, 27 February 2015 >>

(Link, Reply)

By

earth - Reply to #206

I spent 5 mins playing with it. brugal didn't give a full example...I mean a loop of 1 demo is not very useful.

I managed to get it so each time you press a key the next demo in the sequence loads. This is not too useful because you still have to press a button...I would like to know how to make the next demo in the loop sequence start when the previous finishes. Anyway:

wolfcam-ql/loop.cfg

in console:
exec loop.cfg - press "0" to go to next demo

<< Comment #204 @ 11:42 CST, 26 February 2015 >>

(Link, Reply)

By

earth - Reply to #202

I guess I shouldn't have made that statement, I don't actually use WW. I'm sure I remember people posting on the QL forums thread that there was some bug that hadn't been fixed, and there hasn't been a new version for a while.

2%

<< Comment #207 @ 11:01 CST, 27 February 2015 >>

(Link, Reply)

By

thuNDa

just for clarification, this is what everyone gets now in wolfcam with *.90?:

EDIT: ok, it works as expected now after deleting the whole baseq3 folder in wolfcam, and replacing it with a fresh baseq3 folder from QL.

Edited by thuNDa at 05:53 CST, 28 February 2015

<< Comment #209 @ 11:16 CST, 27 February 2015 >>

(Link, Reply)

By

earth - Reply to #207

yeah, sit tight :/

<< Comment #210 @ 11:27 CST, 27 February 2015 >>

(Link, Reply)

By

thuNDa - Reply to #209

you take care of the project now? :)

<< Comment #211 @ 11:34 CST, 27 February 2015 >>

(Link, Reply)

By

earth - Reply to #210

haha! No, nono, no

<< Comment #214 @ 06:30 CST, 28 February 2015 >>

(Link, Reply)

By

thuNDa - Reply to #209

http://www.esreality.com/post/2447913/wolfcam-10-0/#pid2714793

<< Comment #212 @ 15:41 CST, 27 February 2015 >>

(Link, Reply)

By

kobe_08 - Reply to #207

I have wolfcam and my .90's display and plays like the older format demos.

@earth_quake

I played around with that and it did indeed loop as many videos and you were willing to put in format. I made new folder and copied the demos I wanted to loop and named the 1, 2, 3 and so on. They played as long as there was power, just like it did with the old QLDTs!

You'll figure out how, I believe in you earth_quake!

<< Comment #213 @ 05:51 CST, 28 February 2015 >>

(Link, Reply)

By

thuNDa - Reply to #212

got it fixed now too.
deleted the old baseq3 folder of wolfcam, and replaced it with a fresh one from QL.

<< Comment #215 @ 08:33 CST, 28 February 2015 >>

(Link, Reply)

By

earth - Reply to #213

you could accuse me of being an idiot...thanks ;) I never have the hud enabled anyway.

<< Comment #216 @ 06:54 CDT, 15 March 2015 >>

(Link, Reply)

By

dansen

how do i change fs_quakelivedir?

<< Comment #217 @ 08:36 CDT, 24 March 2015 >>

(Link, Reply)

By

zeroql - Reply to #216

try making shortcut and adding this E:\wolfcamQL\wolfcamql11.0test3\wolfcamql.exe +set fs_homepath E:\wolfcamQL\wolfcamql11.0test3\wolfcam-ql +exec demoplayer.cfg

Edited by zeroql at 08:54 CDT, 24 March 2015

<< Comment #218 @ 17:02 CDT, 24 March 2015 >>

(Link, Reply)

By

zeroql

if somebody needs cfg for wolfcam 11.3

download: http://www.mediafire.com/download/iudlvfpx6i66yi6/Cfg+hud.rar

sample: https://www.youtube.com/watch?v=KfLle8rE47k&feature=youtu.be

Edited by zeroql at 17:02 CDT, 24 March 2015

<< Comment #219 @ 18:20 CDT, 24 March 2015 >>

(Link, Reply)

By

Legless - Reply to #218

Do this have hax included?

6%

<< Comment #220 @ 17:19 CDT, 26 March 2015 >>

(Link, Reply)

By

*creep

Hello nerds. Does anyone know if it's possible to edit simple items in fx file and what the command for that is, ex. weapon/rocket/simpleicon ...?
I wanna add stuff like worldglow etc. and see how it turns out but don't even know how to call the command. helplx.

<< Comment #222 @ 09:20 CDT, 29 March 2015 >>

(Link, Reply)

By

Legless - Reply to #220

Nope :'(

There are no models scripts except /weapon/*/projectile and player/*/trail. I asked brugal to add this in 2013 :-(

8%

<< Comment #223 @ 12:24 CDT, 29 March 2015 >>

(Link, Reply)

By

*creep - Reply to #222

:(

<< Comment #224 @ 15:01 CDT, 29 March 2015 >>

(Link, Reply)

By

Legless - Reply to #223

I someone will explain how to compile wolfcam on windows, i can try to modify fx code, but...

<< Comment #225 @ 16:35 CDT, 29 March 2015 >>

(Link, Reply)

By

*creep - Reply to #224

Is it atleast possible make it shiny/glowing in shader files? I have mad simple icon weapon animations but wuld just like to have a glow in them to make them stand out more, rail green, rocket red etc..

It still doesn't look bad as it is now, so if it's not possible I can roll with it. Still awesome if it was possible make som script effects to them. \o/

<< Comment #226 @ 16:58 CDT, 29 March 2015 >>

(Link, Reply)

By

Legless - Reply to #225

I think the best you can do for now is add the glow to texture or shader.

like
{
map icons/rail.png
}
{
map glowOrb.png
blendfunc add
}

Edited by Legless at 17:01 CDT, 29 March 2015

4%

<< Comment #227 @ 05:16 CDT, 30 March 2015 >>

(Link, Reply)

By

*creep - Reply to #226

Nice, thanks a lot! I will experiment with this later to see if it's to any use. \o/

<< Comment #301 @ 03:50 CDT, 7 May 2015 >>

(Link, Reply)

By

earth - Reply to #224

oh man I wish...

<< Comment #221 @ 03:26 CDT, 29 March 2015 >>

(Link, Reply)

By

mdv

some guys were asking for the igmdb render texture pack (no it doesnt use fx, just textures) here it is. only contains community made stuff, wouldnt be bad if the next version of wolfcam would contain the pack by default

http://mdv.igmdb.org/wolfcam/zzz_metal_xcsv.pk3

- most of the textures are from the ioquake and other packs from moddb. kitten said some of the textures doesnt fit in the game. i have started looking into the texturepack, so i had to delete some of the gothic textures. they look great, but doesnt fit in for some reason.
- weapon skins are random, some from the creep pack, some from the deafult pack, some from kos's pack, theres a rl texture made from 2 seperate ones. etc
- high res cpm icons from kos. you can delete these to get the default q3/ql icons and simpleitems.
- yes, it works with q3 and ql as well
- i think by default it has the cpm big bone granade model
- was a debate on the hologram or classic flag, but eventually the classic looks a bit better in the quake "world" + if a new gametype comes in for example with a white flag, it gonna looks stupid that this flag is cloth the other one is hologram...so its a classic flag with oldschool 3wave textures. this should make it good for both ql and q3.
- common question is: "why dont ql use this pack, why cant we have nice things, boohoo" thing is its a community pack made by several ppl, even i cant tell how many textures ive "stolen" from certain packs. id would have to pay all these guys for basicly getting money from this pack.

nothing special, i though i would save some time for people trying to make fresh lookin movies. goes into the wolfcamql\wolfcam-ql. hf kids.

12%

<< Comment #228 @ 09:15 CDT, 11 April 2015 >>

(Link, Reply)

By

Legless

Is it possible to use diffirent shaders for weapons in hands and weapons on ground?

Id like to have something like inverted drawgun 3, where weapon in hands have all textures and weapons on ground have picmipped silhouettes.

<< Comment #229 @ 05:20 CDT, 14 April 2015 >>

(Link, Reply)

By

AsphyxEvents

what was the command in wolfcam to freefly or freecam trough walls ?

would be nice to know again!

Edited by AsphyxEvents at 05:21 CDT, 14 April 2015

<< Comment #230 @ 05:34 CDT, 14 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #229

freecam

bind enter "freecam" is the default here, though that may have been WolfWhisperer's influence

I bet you feel a little silly now ;D

Edited by Yakumo at 05:35 CDT, 14 April 2015

<< Comment #231 @ 06:19 CDT, 14 April 2015 >>

(Link, Reply)

By

Legless - Reply to #229

dont forget /cg_freecam_noclip 1

1%

<< Comment #232 @ 09:11 CDT, 14 April 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #231

Dear Yakumo .

/freecam i know, always add cmd`s over console) :)

ah Thanks Legless, i forgot about ( noclip ) !

9%

<< Comment #233 @ 09:36 CDT, 14 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #231

Ah that had already been set to 1 (by WolfWhisperer again probably), I didn't know it had a separate cvar.

Edited by Yakumo at 09:37 CDT, 14 April 2015

<< Comment #234 @ 15:46 CDT, 23 April 2015 >>

(Link, Reply)

By

illiterate

anyone know when a new wolfcam will come out?

<< Comment #235 @ 06:59 CDT, 24 April 2015 >>

(Link, Reply)

By

kodisha

please help?

how to fix EV_DAMAGEPLUM? i see ton of black squares, its really unusable at the moment.

(also using Wolfcam 11 test3)

<< Comment #236 @ 07:18 CDT, 24 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #235

You can't, hence you see it prefixed with FIXME:
It's a sign the developer's flagged it intentionally meaning to fix it later before release.

And if you see null textures everywhere it's because you've forgotten to replace ALL the pk3's in the wolfcam baseq3 with the new ones from the game (or just symlink your game baseq3 folder to the wolfcam one)

Edited by Yakumo at 07:20 CDT, 24 April 2015

<< Comment #237 @ 10:18 CDT, 24 April 2015 >>

(Link, Reply)

By

kodisha - Reply to #236

i just see null textures where plums should go, i did copy ALL of pk3's to the WC folder.

Will double check and try again once i get home from work :/

<< Comment #238 @ 11:32 CDT, 24 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #237

Ah, you meant plums specifically, I think wolfcam just doesn't support them properly at all yet.

<< Comment #239 @ 12:56 CDT, 24 April 2015 >>

(Link, Reply)

By

kodisha - Reply to #238

Yet?? Damn its been months since that update.

Any workaround? Can i turn them off?
Does that wolfwhisteler works?

How are people creating movies nowadays??

<< Comment #240 @ 13:54 CDT, 24 April 2015 >>

(Link, Reply)

By

ollir - Reply to #239

I have the same issue as you do. It started after the update, before that everything was fine. Fun thing is, my Windows installation of Wolfcam doesn't have the problem, only the Linux version.
And the version of my Windows wolfcamql is 11.0test2 instead of 11.0test3 as is the Linux version.
So you might want to try with the test2-version.

<< Comment #241 @ 23:09 CDT, 27 April 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #240

Delete all pak*.pk3 from the wolfcam/baseq3 and copy the paks
new from the quakelive folder.
Delete your q3.config aswell from your wolfcam folder.
Add the new cvars in your autoexec ( cg_announcer "2 ") for examble.
Works like a charm!

<< Comment #242 @ 02:05 CDT, 28 April 2015 >>

(Link, Reply)

By

ollir - Reply to #241

I have a symlink to the baseq3 already so they are always up to date, but I will try the other things, thanks :)

<< Comment #243 @ 06:37 CDT, 28 April 2015 >>

(Link, Reply)

By

bobwinters - Reply to #242

I found that if you already have pak04.pk3 (from a previous QL installation), and put that inside your baseq3 folder, Wolfcam seems to not display the invalid plum texture. I have no idea why that fixes it. It's not a perfect fix because the sky doesn't display on some maps, (e.g almostlost). Make sure you completely delete everything in your wolfcam baseq3 directory before you copy everything from your QL installation directory plus the pak04.pk3 file.

Using test2-version doesn't help either. If you don't already have pak04.pk3, I'll see if I can upload it somewhere.

Here's an example of it working. I uploaded a few hours ago. https://www.youtube.com/watch?v=OKQP92c7oPA

<< Comment #244 @ 07:07 CDT, 28 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #243

I can only assume it's a renamed/changed asset, and wolfcam is obviously only looking for the old one.

Should be easy to figure out with a decent diff app like Beyond Compare, you wouldn't even need to unzip the two pk3 files, but it might want you to rename them to .zip before it recognised them properly and let you browse the file structure.

Edited by Yakumo at 07:08 CDT, 28 April 2015

<< Comment #245 @ 12:46 CDT, 29 April 2015 >>

(Link, Reply)

By

qdbp - Reply to #243

link to that download would be great yo

<< Comment #246 @ 13:45 CDT, 29 April 2015 >>

(Link, Reply)

By

qdbp - Reply to #245

if anyone needs the pak4.pk3 could get it here or from a q3a copy i guess or whatever...

<< Comment #247 @ 14:46 CDT, 29 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #246

That's not a quakelive pk3 file.

<< Comment #248 @ 15:16 CDT, 29 April 2015 >>

(Link, Reply)

By

qdbp - Reply to #247

-.- no really?
anyways, it works. The consoles still getting flooded with the FIXME EV_DAMAGEPLUM but it somehow took away them boxes when hitting an enemy, and the grey screen when getting hit. (not gibs, iv no idea wtf it is but that pk4 file fixed it somehow...

<< Comment #258 @ 18:21 CDT, 30 April 2015 >>

(Link, Reply)

By

illiterate - Reply to #248

What version of Wolfcam are you using? The pak4 that you linked kinda works for me but I still see these blocks :(

<< Comment #263 @ 07:38 CDT, 1 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #258

wolfcamql-11.0test3

<< Comment #249 @ 02:27 CDT, 30 April 2015 >>

(Link, Reply)

By

AsphyxEvents

i havent this pak4.pk3 and no problems with the damageplums or boxes when hitting an enemy!
( but i have the debug information : FIXME EV_DAMAGEPLUM )

<< Comment #250 @ 03:09 CDT, 30 April 2015 >>

(Link, Reply)

By

qdbp - Reply to #249

beats me lol

<< Comment #251 @ 03:58 CDT, 30 April 2015 >>

(Link, Reply)

By

earth - Reply to #250

hey qd :) I don't know what sort of wolfcam setup you're using, but I wonder if it's got anything to do with fx / custom shaders. In any case I would suggest people sit tight on movie making until brugal gets wolfcam fully up to date

<< Comment #252 @ 04:58 CDT, 30 April 2015 >>

(Link, Reply)

By

Yakumo - Reply to #251

2016 then... :-/

<< Comment #253 @ 05:23 CDT, 30 April 2015 >>

(Link, Reply)

By

earth - Reply to #252

2016
0
1
6

will be a great year for quake movies :D

<< Comment #262 @ 06:51 CDT, 1 May 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #252

Not necessarily ;)

<< Comment #254 @ 10:12 CDT, 30 April 2015 >>

(Link, Reply)

By

qdbp - Reply to #251

eq, its just ww updated with the wc test3, everything else is default, but yeah, if it works dont fix it right?
is brugal active/alive/motivated?

<< Comment #255 @ 10:35 CDT, 30 April 2015 >>

(Link, Reply)

By

earth - Reply to #254

active/alive/motivated

Alive - certainly
Active - as much as ever
Motivated - doesn't seem massively

In fairness he has a huge stack of work to do, but I remember hearing that he's not expecting to release anything new for quite a while.

<< Comment #256 @ 12:18 CDT, 30 April 2015 >>

(Link, Reply)

By

Legless - Reply to #251

Whats up wth fx/shaders?
Mine works perfectly. ^___^

<< Comment #257 @ 15:24 CDT, 30 April 2015 >>

(Link, Reply)

By

earth - Reply to #256

I'm just saying that missing shaders and default textures in the place of explosions is characteristic of a fucked up fx

<< Comment #259 @ 06:05 CDT, 1 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #257

i noticed my plasma cells are grey blocks aswell, it really doesnt matter right now, i just need to sort out these demos, got like 1K to sort... should keep me busy untill the new wolfcam is released :/

<< Comment #260 @ 06:06 CDT, 1 May 2015 >>

(Link, Reply)

By

earth - Reply to #259

should be easy enough to hunt down the missing shader.

Shameless self-publicity alert: This might help you

<< Comment #261 @ 06:47 CDT, 1 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #260

lol i download that on 28/07/2013 @ 03:45am before you even made it public :P hahah but yeah that should work.
BUT if you could ( or anyone else could ) hook me up with This rocket model, would be shweet.

<< Comment #266 @ 16:33 CDT, 2 May 2015 >>

(Link, Reply)

By

earth - Reply to #261

haha, exclusive ;)

It's from open arena. I've got a copy on my pc but I'm not at home just now. Download pak0.pk3 from somewhere and I'm sure you'll find it easy. However, it has a white box when viewed from the front that I haven't managed to get rid of yet. I never tried too hard but iirc I tried doing 'cull front' in some shader :p (which legless suggested). If you work it out let me know ;)

<< Comment #272 @ 15:52 CDT, 3 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #266

right baro heres the rocket w/o the white block behind it, rocket.md3
now i just need a flame/smoke behind mine, since its just the rocket... gotta figure this out now again :(

<< Comment #273 @ 16:58 CDT, 3 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #272

sorted. done. izi.

<< Comment #281 @ 16:39 CDT, 4 May 2015 >>

(Link, Reply)

By

earth - Reply to #273

cheers, what did you do out of interest? Let me know if you need help with fx ;)

<< Comment #287 @ 09:58 CDT, 5 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #281

what did i do about what? lol ? the rocket, i just deleted the block, and the fx, well, i just needed to check the box in wolfwipsererer, the GFX box in options lol,
and yeah i might look for some fx i could reconfig. You got any of yours or one thats decent posted anywhere?

<< Comment #288 @ 10:07 CDT, 5 May 2015 >>

(Link, Reply)

By

earth - Reply to #287

fx, well, i just needed to check the box in wolfwipsererer, the GFX box in options

*throws up, violently*

rEnk :) Well, a partial version anyway.

I think it really depends on what you want. What do you want? o.0

<< Comment #298 @ 14:42 CDT, 6 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #288

really just want something minimal... some reason the fx's doesnt want to load... mine, defult, downloaded.... even after /cg_fxfile,
think wolfwispererer is le broke
:humiliation:

Edited by qdbp at 14:46 CDT, 6 May 2015

<< Comment #299 @ 14:57 CDT, 6 May 2015 >>

(Link, Reply)

By

earth - Reply to #298

I gave up on WW ages ago ))

<< Comment #300 @ 15:34 CDT, 6 May 2015 >>

(Link, Reply)

By

qdbp - Reply to #299

roger that.

<< Comment #264 @ 08:02 CDT, 1 May 2015 >>

(Link, Reply)

By

Yakumo - Reply to #259

heh, I just came back to post that about plasma too.

I also keep having problems where everything under the hud goes all white, and he only bit of 3d showing the map is in a box under the avatar head top right of the screen, that started with QL update 23.

<< Comment #265 @ 11:10 CDT, 2 May 2015 >>

(Link, Reply)

By

AsphyxEvents

anyone know how to disable this white flag icon over the head ?

Screenshot-> http://imgur.com/PH0wd0d

<< Comment #267 @ 17:03 CDT, 2 May 2015 >>

(Link, Reply)

By

sophia

drunken mummy will not load for me at all in wolfcam does someone know of a fix? failed to load map drunken mummy

<< Comment #269 @ 20:20 CDT, 2 May 2015 >>

(Link, Reply)

By

bobwinters - Reply to #267

Make sure you copy the drunken mummy .pk3 map from your QL baseq3 folder into your wolfcamql baseq3 folder. If that doesn't work, wait for wolfcam 11.0? :-(

Edited by bobwinters at 20:21 CDT, 2 May 2015

<< Comment #268 @ 20:18 CDT, 2 May 2015 >>

(Link, Reply)

By

bobwinters

Here's the pak4.pk3 I mentioned earlier in case you don't have it already, it's only 0.07 MB. Put that file into your baseq3 folder and it will somehow remove the blank plum textures.

<< Comment #271 @ 13:28 CDT, 3 May 2015 >>

(Link, Reply)

By

Lam | - Reply to #268

Nah, don't put old paks in there randomly.

It's enough to put this shader file into your wolfcamql/wolfcam-ql/shaderoverride/ directory (create it if it wasn't there).

WolfcamQL still expects viewBloodBlend and bloodExplosion shaders which were renamed/removed from QL (in preparation for the gibs DLC), so that shaderoverride trick will restore those two without affecting anything else, until WolfcamQL is updated.

<< Comment #274 @ 18:16 CDT, 3 May 2015 >>

(Link, Reply)

By

Yakumo - Reply to #271

Any idea why this white screen keeps happening?

If I drop the console down, then pop it back up, the white turns all black for couple of frames, and then fills in all white again via multiple expanding white circles randomly dotted all over the screen.

Edited by Yakumo at 06:07 CDT, 6 May 2015

<< Comment #275 @ 00:15 CDT, 4 May 2015 >>

(Link, Reply)

By

danstar - Reply to #274

r_enablepostprocess 0 fixed this for me.

8%

<< Comment #279 @ 05:15 CDT, 4 May 2015 >>

(Link, Reply)

By

Yakumo - Reply to #275

Thanks, I was hoping to fix it without turning that off though :)

<< Comment #278 @ 05:04 CDT, 4 May 2015 >>

(Link, Reply)

By

*creep - Reply to #274

Top left.

<< Comment #276 @ 00:48 CDT, 4 May 2015 >>

(Link, Reply)

By

bobwinters - Reply to #271

Thanks! That seems to fix it :-).

<< Comment #270 @ 08:05 CDT, 3 May 2015 >>

(Link, Reply)

By

AsphyxEvents

searched 2 days : no result!

anyone know how to disable this white flag icon over the head ?

Screenshot-> http://imgur.com/PH0wd0d

<< Comment #277 @ 03:36 CDT, 4 May 2015 >>

(Link, Reply)

By

lokaria - Reply to #270

I also tried with no success :/

<< Comment #280 @ 06:51 CDT, 4 May 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #277

cant find anything about that :(

Edited by AsphyxEvents at 06:52 CDT, 4 May 2015

<< Comment #283 @ 17:01 CDT, 4 May 2015 >>

(Link, Reply)

By

earth - Reply to #280

haha, this has evaded the movie making community for ages :D

Your best bet is to hack it by creating a blank texture in wolfcam-ql/sprites/flagcarrier.png and flagcarrier_neutral.png

Should work for you :)

<< Comment #282 @ 16:50 CDT, 4 May 2015 >>

(Link, Reply)

By

*creep - Reply to #270

cg_drawSprites 0 ?

3%

<< Comment #284 @ 22:59 CDT, 4 May 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #282

PERFECT!!!

thank you creep !

Screenshot with ( cg_drawSprites "0" ) -> http://i.imgur.com/jcstyoh.jpg

2%

<< Comment #294 @ 05:31 CDT, 6 May 2015 >>

(Link, Reply)

By

lokaria - Reply to #284

Wolfcam 10 or wolfcam 11?

I had sprites 0 afair and it didnt remove that flag icon on wolfcam 11, will try again tonight

<< Comment #296 @ 06:41 CDT, 6 May 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #294

i use wolfcam-11.0test3

Download Link: http://sourceforge.net/projects/wolfcamql/fil...p/download

Edited by AsphyxEvents at 06:42 CDT, 6 May 2015

3%

<< Comment #285 @ 02:42 CDT, 5 May 2015 >>

(Link, Reply)

By

illiterate

anyone know how to fix - http://i.imgur.com/sjsANVR.jpg

i am missing that tiny platform, just appear invisible to me :(

<< Comment #286 @ 04:08 CDT, 5 May 2015 >>

(Link, Reply)

By

earth - Reply to #285

you have the wrong deepinside.pk3 for your demo. Try copying the one from your ql dir to your wc dir

<< Comment #289 @ 16:06 CDT, 5 May 2015 >>

(Link, Reply)

By

illiterate - Reply to #286

any specific place i should copy the pk3 file to? inside the wc dir

<< Comment #290 @ 17:30 CDT, 5 May 2015 >>

(Link, Reply)

By

earth - Reply to #289

baseq3 perhaps? :D

<< Comment #291 @ 01:11 CDT, 6 May 2015 >>

(Link, Reply)

By

illiterate - Reply to #290

still have that missing platform :(

copied from ql baseq3 and pasted in wc baseq3

<< Comment #292 @ 03:47 CDT, 6 May 2015 >>

(Link, Reply)

By

earth - Reply to #291

Did you try copying all the files in ql baseq3 to wc baseq3?

How old is the demo?

<< Comment #293 @ 04:47 CDT, 6 May 2015 >>

(Link, Reply)

By

illiterate - Reply to #292

copied the whole ql baseq3 no luck :(

and the demo is from 2011 qcon

<< Comment #295 @ 05:49 CDT, 6 May 2015 >>

(Link, Reply)

By

thuNDa - Reply to #293

then delete(rename to be on the safe side) the wc baseq3 folder first, then copy the ql baseq3 folder.

<< Comment #297 @ 06:49 CDT, 6 May 2015 >>

(Link, Reply)

By

earth - Reply to #293

Read this:

If you are only using the newer quake live pk3s old demos will be played back with the new maps. You can also copy over qz*.pk3 from an older version of quakelive and then a demo will use the same map that it was recorded with. Note that you should only copy the files that start with qz (ex: qzteam1.pk3, qzdm6.pk3, etc.). You can also force the use of the older maps with newer demos using cg_forceMap.

Source

So the only solution I can think of is to hunt down a pre-change version of deepinside.pk3 :D

Although it seems a bit odd that part of the map just disappears. I don't know enough about mapping to understand, but I've seen it before.

1%

<< Comment #302 @ 07:13 CDT, 8 May 2015 >>

(Link, Reply)

By

illiterate - Reply to #297

i was lucky enough to find a old version of the map and it works now.

many thanks for your help <3

<< Comment #303 @ 08:06 CDT, 8 May 2015 >>

(Link, Reply)

By

earth - Reply to #302

Brilliant! I was not expecting this to be successful :p

<< Comment #304 @ 02:40 CDT, 11 May 2015 >>

(Link, Reply)

By

AsphyxEvents

anyone have a fix or a solution for this ?

following folder : wolfcam-ql -> models -> weapon2 -> plasma

i made my own plasma.png but it appears just the default plasma texture

all others like railgun/rockets etc running without problems ( i just replaced the old jpg`s or png`s)
:(

edit: i modified the pak00.pk3 aswell but the same, default plasma texture!
at least it proves that the texture pack is fine, problem is somewhere else

Edited by AsphyxEvents at 08:16 CDT, 12 May 2015

<< Comment #305 @ 04:53 CDT, 21 May 2015 >>

(Link, Reply)

By

brugal

support for changed blood shaders in April ql release (view damage, trail, spurt, mark)

http://sourceforge.net/projects/wolfcamql/files/wolfcamql-11.0test4.zip/download

36%

<< Comment #306 @ 06:52 CDT, 21 May 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #305

He lives!!

<< Comment #307 @ 07:18 CDT, 21 May 2015 >>

(Link, Reply)

By

commissar - Reply to #305

Thanks brugal!

Edited by commissar at 07:18 CDT, 21 May 2015

<< Comment #308 @ 09:55 CDT, 21 May 2015 >>

(Link, Reply)

By

Yakumo - Reply to #305

Many many many thanks for your hard work.

Still has 'FIXME EV_DAMAGEPLUM' for those wondering BUT it only seems to show up once per game now instead of constant spam \o/

<< Comment #309 @ 05:26 CDT, 22 May 2015 >>

(Link, Reply)

By

thuNDa - Reply to #308

i needed to copy a fresh baseq3 folder again for this, because screendamage texture was broken.
but now console opens with one key press again, before i had to press it multiple times whyever.

<< Comment #310 @ 18:14 CDT, 24 May 2015 >>

(Link, Reply)

By

earth - Reply to #305

/love

edit: player trails are fun :D

Edited by earth_quake at 04:40 CDT, 25 May 2015

<< Comment #311 @ 12:59 CDT, 16 June 2015 >>

(Link, Reply)

By

qdbp

is there any wolfcam type program for quake 4 demos?

<< Comment #312 @ 01:19 CDT, 21 June 2015 >>

(Link, Reply)

By

Anonymous (184.90.174.117)

http://sourceforge.net/projects/wolfcamql/files/latest/download

wolfcamql-11.0test5.zip

7%

<< Comment #313 @ 02:04 CDT, 22 June 2015 >>

(Link, Reply)

By

Anonymous (93.86.70.52)

how to fix when the scan frag button doesn't responds to a mouse click. neither the toggle 2D button. I'm using wolfwhisperer-1.3.9.11+wolfcamql-11.0test5.zip. Demos in the folder were recorded in may, june

<< Comment #314 @ 05:05 CDT, 22 June 2015 >>

(Link, Reply)

By

earth - Reply to #313

1. Open Console
2. Type /fragforward
3. ???
4. Profit

<< Comment #315 @ 09:30 CDT, 22 June 2015 >>

(Link, Reply)

By

Anonymous (93.86.70.52)

fragforward fixed it :) how to fix the toggle 2D button? it doesn't reacts when I click on it, thanx !!

<< Comment #316 @ 09:54 CDT, 10 July 2015 >>

(Link, Reply)

By

earth

WolfcamQL11.0test6

Changelog

Edited by earth_quake at 10:27 CDT, 10 July 2015

13%

<< Comment #317 @ 16:20 CDT, 11 July 2015 >>

(Link, Reply)

By

kevlark - Reply to #316

thx

<< Comment #318 @ 11:13 CDT, 19 July 2015 >>

(Link, Reply)

By

brugal

this version should be up to date with the latest version of quake live:

https://github.com/brugal/wolfcamql/releases/tag/v11.0test7

15%

<< Comment #319 @ 12:00 CDT, 22 July 2015 >>

(Link, Reply)

By

zeroql

on new version, cvar to disable flag inducator is cg_helpIconStyle 0
this is what i am talking about http://i.imgur.com/gexLr0Q.jpg

1%

<< Comment #395 @ 16:05 CST, 21 February 2016 >>

(Link, Reply)

By

lee.ql - Reply to #319

thx bro!!!

<< Comment #320 @ 17:31 CDT, 22 July 2015 >>

(Link, Reply)

By

brugal

this fixes a flag pickup crash in v11.0test7:

https://github.com/brugal/wolfcamql/releases/download/v11.0test9/wolfcamql-11.0test9.zip

<< Comment #322 @ 02:24 CDT, 29 July 2015 >>

(Link, Reply)

By

brugal

preliminary support for new ql protocol 91

https://github.com/brugal/wolfcamql/releases/download/v11.0test10/wolfcamql-11.0test10.zip

55%

<< Comment #324 @ 05:40 CDT, 29 July 2015 >>

(Link, Reply)

By

*creep - Reply to #322

Omfg thanks!

<< Comment #325 @ 06:16 CDT, 29 July 2015 >>

(Link, Reply)

By

Yakumo - Reply to #322

Pluses hard.

QuakeCon 2015 demos are all on http://www.quakeconcdn.org/ :)

<< Comment #328 @ 08:15 CDT, 29 July 2015 >>

(Link, Reply)

By

SigningOff - Reply to #325

Unfortunately a lot missing :-/

<< Comment #329 @ 08:20 CDT, 29 July 2015 >>

(Link, Reply)

By

tacern - Reply to #325

Where's the rest of them?

<< Comment #327 @ 07:02 CDT, 29 July 2015 >>

(Link, Reply)

By

phy1um - Reply to #322

A shining beacon among the lost souls of the QL player base. Awesome work!

<< Comment #330 @ 10:01 CDT, 29 July 2015 >>

(Link, Reply)

By

*creep - Reply to #322

FYI, This build replaces quad PU with invisibility PU, both shaders and HUD elements.

8%

<< Comment #333 @ 11:50 CDT, 29 July 2015 >>

(Link, Reply)

By

Yakumo - Reply to #330

heh, whoops.

<< Comment #336 @ 09:57 CDT, 30 July 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #330

lol noticed too, Invisible/Quad

any solution for this problem ?

Edited by AsphyxEvents at 10:14 CDT, 30 July 2015

<< Comment #337 @ 10:09 CDT, 30 July 2015 >>

(Link, Reply)

By

*creep - Reply to #336

I tried editing the shaders by replacing all the commands inside powerup/invisibility { xxx } with the quad ones. It made it look like quad from pov but still whole playermodel is transparent.

The icons was just to rename the quad.png to invis.png and place inside the icons folder.

Maybe better to wait for the proffesional himself to fix this.

<< Comment #338 @ 04:15 CDT, 31 July 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #337

yeah this would be the best way with a pro solution! :)

<< Comment #332 @ 11:37 CDT, 29 July 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #322

Big THX Brugal!

i hope the missing demos are available soon. evil vs rapha duel grandfinals for examble!

<< Comment #334 @ 12:02 CDT, 29 July 2015 >>

(Link, Reply)

By

MaverickMSG - Reply to #322

Added this into the demo renderer. Thanks brugal!

Edited by MaverickMSG at 12:02 CDT, 29 July 2015

<< Comment #335 @ 13:08 CDT, 29 July 2015 >>

(Link, Reply)

By

Crotazzo

can someone post a config with hud and a few pause, change player, etc binds for playback? whenever i try to use wolfcam y have no hud and i dont know how to do things...
Thanks brugal!

Edited by Crotazzo at 13:08 CDT, 29 July 2015

<< Comment #339 @ 19:37 CDT, 5 August 2015 >>

(Link, Reply)

By

venom_

Hi brugal, this video show some CTF bugs, version wc11, test 10, I hope to help a bit at your great work.

https://www.youtube.com/watch?v=2_gEdOwSaQY&feature=youtu.be

<< Comment #340 @ 05:56 CDT, 7 August 2015 >>

(Link, Reply)

By

brugal

protocol 91 updates (correct network information and new powerup indexes), q3mme camera support

https://github.com/brugal/wolfcamql/releases/download/v11.0test11/wolfcamql-11.0test11.zip

29%

<< Comment #341 @ 10:49 CDT, 7 August 2015 >>

(Link, Reply)

By

kevlark - Reply to #340

I cannot change font for fragmessage error "failed to load font ..... for 914"

Edited by kevlark at 10:59 CDT, 7 August 2015

<< Comment #342 @ 11:02 CDT, 7 August 2015 >>

(Link, Reply)

By

Clau - Reply to #340

Thank you for the update! The evils elder demo from the grand final works now :)

<< Comment #343 @ 18:51 CDT, 7 August 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #340

omg does this mean Wolfcam has proper cameras now????!?!?!?

3%

<< Comment #344 @ 19:01 CDT, 7 August 2015 >>

(Link, Reply)

By

Teen Queen ' - Reply to #340

B R U G A L
R
U
G
A
L

3%

<< Comment #345 @ 05:53 CDT, 8 August 2015 >>

(Link, Reply)

By

kevlark

q3mme camera and last wolfcam test https://www.youtube.com/watch?v=oYF_jPbVd4s
I thing about only this command "/q3mmecamera add " and "playq3mmecamera" What other commands exist for this
how to make how to rewind the mouse+shift same in q3mme?

12%

<< Comment #346 @ 06:24 CDT, 8 August 2015 >>

(Link, Reply)

By

Yakumo - Reply to #345

that's pretty sick :)

<< Comment #347 @ 08:35 CDT, 8 August 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #345

bind shift "+mouseseek" ?

6%

<< Comment #348 @ 19:27 CDT, 8 August 2015 >>

(Link, Reply)

By

venom_

camera usage:
camera add/del a camera point at current viewpoint and time.
camera clear: clear all camera point
camera lock, lock the view to camera point or free moving.
camera shift time: move time indexes of camera point by certain amount.
camera next/prev : go to time of index of next or previous point.
camera start/ end: current time with be set as start/end of selection.
camera pos/angles: (a)0 (a)o (a0) directly control position/angles, optional a before numbre to add a current value.
camera target: clear/set the target currenly being aimed at.
camera targetnext/prev: go to the next or previous player.
camera smooth pos 0-2 : linear, catmullrom, bezier interpolation.
camera smoothangles 0-1: linear, quarternion, interpolation.
camera toggle value: xor the flags with this value.
camera smooth: mooth out the speed between select start/end.
camera move here/x y z move the camera track to view position or directly moving around.
camera rotate: pitch yaw roll, rotate entire camera track around current view position.

Thanks brugal :)

6%

<< Comment #349 @ 13:40 CDT, 24 September 2015 >>

(Link, Reply)

By

daka '

is there a way to remove panels in game completely?

<< Comment #350 @ 14:22 CDT, 24 September 2015 >>

(Link, Reply)

By

*creep - Reply to #349

with panels you mean everything displaying on the hud?

<< Comment #351 @ 19:13 CDT, 24 September 2015 >>

(Link, Reply)

By

daka ' - Reply to #350

i mean in game "quakelive" ad panels

<< Comment #352 @ 00:37 CDT, 25 September 2015 >>

(Link, Reply)

By

*creep - Reply to #351

It should be possible to edit the ads away in gtkradiant, but you can't do it through a command.

<< Comment #353 @ 07:31 CDT, 25 September 2015 >>

(Link, Reply)

By

daka ' - Reply to #352

thanks but i never used that before,

but for some reason, i don't know what i did, some of the panels in maps are completely gone and i like how it looks, so i was wondering if i could get rid of the rest ones too

<< Comment #354 @ 13:10 CDT, 28 September 2015 >>

(Link, Reply)

By

Tyler_za - Reply to #353

You can simply replace the adverts with any image you like.

Create a folder like this and place the content inside:
wolfcamql10.3\wolfcam-ql\textures\ad_content

If you need reference, the ads are in the pak00.pk3 - which you can open with any compression software like 7zip.

pak00.pk3 can be found here:
wolfcamql10.3\baseq3\pak00.pk3\textures\ad_content\

<< Comment #355 @ 22:38 CDT, 8 October 2015 >>

(Link, Reply)

By

daka ' - Reply to #354

i know that, funny thing is, there aren't any quake panel in the game except there is a weird bugged one on dm6 at mega/quad that is just glowing white. i really don't know what's the problem

btw i'm using wolfcamql 11.0 test 9

and one more thing, i can't play demos on any map that isn't in quake live anymore like dm6 intel, hellsgateredux etc

<< Comment #356 @ 04:03 CDT, 9 October 2015 >>

(Link, Reply)

By

*creep - Reply to #355

Replace your old pk3's in your wolfcam folder with fresh ones.

<< Comment #358 @ 15:33 CDT, 9 October 2015 >>

(Link, Reply)

By

daka ' - Reply to #356

there aren't "fresh" pk3s of maps that aren't in ql anymore

;)

Edited by daka at 15:37 CDT, 9 October 2015

<< Comment #363 @ 13:24 CDT, 12 October 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #355

There's a command to replace them in-game, called cg_adShaderOverride. You can choose which ads to replace with what shader, allowing you to set different shaders for the different billboards throughout the level (cg_adShader1, 2, etc. I think).

1%

<< Comment #357 @ 06:34 CDT, 9 October 2015 >>

(Link, Reply)

By

AsphyxEvents

anyone have a fix or a solution for this ?

following folder : wolfcam-ql -> models -> weapon2 -> plasma

i made my own plasma.png but it appears just the default plasma texture

all others like railgun/rockets etc running without problems ( i just replaced the old jpg`s or png`s)
:(

<< Comment #359 @ 10:23 CDT, 12 October 2015 >>

(Link, Reply)

By

Strammer Max

Want to watch some Quake 3 Arena demos with protocol 68, with the "wallhack" feature in Wolfcam aktivated. Is that possible without having Quake Live? If not, is there a source for the needed baseQ files? (Other than installing QL of course.)

<< Comment #360 @ 11:29 CDT, 12 October 2015 >>

(Link, Reply)

By

earth - Reply to #359

can't you just put your q3 baseq3 in and use cg_wh 1?

<< Comment #361 @ 13:05 CDT, 12 October 2015 >>

(Link, Reply)

By

Strammer Max - Reply to #360

Guess you are ironic, right? If not: No, tried to put in the Q3A baseq3 stuff in it before and also switched to protocol 68 with a .bat-file: "@echo off
start wolfcamql +set protocol 68"
It starts with the id-logo like Q3A and I even can lower the console. But says something like a missing console tga and/or missing shaders when I try to start the demo. Guess I need the QL files?
Console has indeed a black background.

<< Comment #362 @ 13:21 CDT, 12 October 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #361

Wolfcam is based on the QL resources, so it won't work all that great without them. It's not worth it to try and get it working with the Q3 resources.

<< Comment #364 @ 13:42 CDT, 12 October 2015 >>

(Link, Reply)

By

Strammer Max - Reply to #362

Thanks. Guess there is no way to get this files avoiding going through the registration for QL?
Also: Does anyone know if the "wallhack" will work with a Q3A demo? Is there maybe an alternative to Wolfcam with the "wallhack" feature?

Edited by Strammer Max at 13:43 CDT, 12 October 2015

<< Comment #365 @ 00:03 CDT, 13 October 2015 >>

(Link, Reply)

By

KittenIgnition - Reply to #364

It will work, it can also work in MME with some effort. Wolfcam doesn't treat the demos very differently, so all commands will work as well as they can.

<< Comment #366 @ 05:36 CST, 5 November 2015 >>

(Link, Reply)

By

brugal

More protocol 91 updates (still missing ut8 support, new spec hud, and new team overhead icons/info). This version uses the *.pak files from the new ql steam release.

https://github.com/brugal/wolfcamql/releases/tag/v11.0test13

18%

<< Comment #367 @ 05:44 CST, 5 November 2015 >>

(Link, Reply)

By

melechesh ' - Reply to #366

Do you think it would be possible to show the name of the demo that you are currently watching in the console / at demo start / at demo end / on demo load screen / etc... ? It becomes quite easy to lose track of which one you just clicked on when absent mindedly going through multiple demos.

<< Comment #368 @ 02:03 CST, 25 November 2015 >>

(Link, Reply)

By

Anonymous (86.92.150.4)

yo guys .. someone can help me . I have problem if i watch me demo and opponent shot me i cant see anythink because i have like white screen ..

<< Comment #369 @ 02:23 CST, 25 November 2015 >>

(Link, Reply)

By

AsphyxEvents - Reply to #368

Most of the time its a shader or script.fx problem.....always or weapon specific?

try it without your script.fx or use default shaders from your ql baseq3 folder

Edited by AsphyxEvents at 02:25 CST, 25 November 2015

<< Comment #370 @ 04:42 CST, 25 November 2015 >>

(Link, Reply)

By

Yakumo - Reply to #368

disable post processing.

<< Comment #371 @ 05:49 CST, 25 November 2015 >>

(Link, Reply)

By

melechesh ' - Reply to #368

upgrade to latest version of wolfcam, the blood spatter shader names were changed in QL in May so older versions of wolfcam can't find the textures and will show the grey square instead

<< Comment #372 @ 00:13 CST, 29 November 2015 >>

(Link, Reply)

By

mentalist

possible bug: In ctf demos the announcer's voice has the teams the wrong way round regarding flag returns.

<< Comment #374 @ 05:08 CST, 29 November 2015 >>

(Link, Reply)

By

Yakumo - Reply to #372

that was a ql bug, brugal must have handled it and then later not realized they fixed it.

<< Comment #373 @ 03:52 CST, 29 November 2015 >>

(Link, Reply)

By

AsphyxEvents

I have a shader problem. Blackbox by the green armor shields.
How can i fix that problem?

Image: https://www.dropbox.com/s/thv8wur9apqyn12/shot0174.jpg?dl=0

EDIT: FIXED!

Edited by AsphyxEvents at 10:02 CST, 2 December 2015

<< Comment #375 @ 05:18 CST, 17 December 2015 >>

(Link, Reply)

By

mdv

FIX FOR THE WHITE SCREEN BUG:

its basicly bloom. you can fix it by disabling post process
r_enablepostprocess 0

however, its mainly caused by the bad handling of 3d icon in the hud itself. i was testing some qcon huds for the render, and turns out that some people like zero4 are using 3d ammo box models. this is mainly because the qlhud editor saves the hud with a 3d ammo icon. so solution without disabling the postprocess: head into the menu hud file, find the ammo section (ctrl+f) and change

ownerdraw CG_PLAYER_AMMO_ICON

to

ownerdraw CG_PLAYER_AMMO_ICON2D

7%

<< Comment #376 @ 06:01 CST, 17 December 2015 >>

(Link, Reply)

By

*creep

How to fix the 'player bob when hit' bug, that occurd with the new steam demos?

<< Comment #377 @ 07:48 CST, 8 January 2016 >>

(Link, Reply)

By

kevlark

Wolfcam support uncompress and huffyv codecs , possible to add lagarith codec or not?

<< Comment #378 @ 11:57 CST, 8 January 2016 >>

(Link, Reply)

By

Insaccato

i have grey screens on wolfcam while reproducing demo, someone else have this problem? is there any way to fix? :((
https://www.youtube.com/watch?v=ZSqljC-HNjo

Edited by Insaccato at 15:08 CST, 8 January 2016

<< Comment #379 @ 11:50 CST, 9 January 2016 >>

(Link, Reply)

By

dehumanizer - Reply to #378

u have newest wolfcam? test13?

<< Comment #380 @ 21:25 CST, 9 January 2016 >>

(Link, Reply)

By

Insaccato - Reply to #379

yes i take it from github, i reinstall everything and now i have a weird bug, i can't even launch wolf whisperer... btw, don't you have any problem with wolf whisperer + last wolfcam version? it's just me being noob?

<< Comment #381 @ 00:09 CST, 10 January 2016 >>

(Link, Reply)

By

dehumanizer - Reply to #380

nope, since i updated to new version i don't have bugs except those with unicode when someone have weird characters in nick then wolfcam changing it to dots, but that's known issue cause wolfcam can't handle it yet. About your problem, connect #wolfcamql irc maybe you will find solution there, everytime i had some problem i was writing it there and there was always someone to help.

3%

<< Comment #382 @ 01:08 CST, 29 January 2016 >>

(Link, Reply)

By

agekara

Have anyone run wolfcamql on win10?
I can launch wolfcamql on my XPS 15 but when I move the cursor, it only moves to the lower-left of the window.
the same thing happens on q3mme, but it works fine on QL/quake3.exe/ioquake3
Strangely speaking, baseq3 on q3mme.exe works fine.
Here the video of how it works
https://www.dropbox.com/s/mbtp3azsivlx1p6/VID_20160127_220348.mp4?dl=0
https://www.dropbox.com/s/9s9b5h0fo3crdfd/VID_20160127_221435.mp4?dl=0

<< Comment #383 @ 15:41 CST, 29 January 2016 >>

(Link, Reply)

By

brugal - Reply to #382

Try disabling high dpi display scaling for the wolfcamql.exe executable. Right click and select properties and then: "On the Compatibility tab, select the Disable display scaling on high DPI settings check box."

https://support.microsoft.com/en-us/kb/2907016

<< Comment #384 @ 03:30 CST, 30 January 2016 >>

(Link, Reply)

By

agekara - Reply to #383

You REALLY made my day!! THX!!

<< Comment #385 @ 08:33 CST, 30 January 2016 >>

(Link, Reply)

By

brugal

utf8 support, fix flag returned vo, steam workshop paks checked

https://github.com/brugal/wolfcamql/releases/tag/v11.0test14

25%

<< Comment #386 @ 11:26 CST, 30 January 2016 >>

(Link, Reply)

By

dehumanizer - Reply to #385

utf8 doesn't work for me :< http://imgur.com/rAGSDmd

<< Comment #387 @ 11:33 CST, 30 January 2016 >>

(Link, Reply)

By

brugal - Reply to #386

is the demo available?

<< Comment #388 @ 11:38 CST, 30 January 2016 >>

(Link, Reply)

By

dehumanizer - Reply to #387

here: http://www.speedyshare.com/k5KYr/TDM-h8-dehum...-001.dm-91 i've found that in full demos utf8 characters works but in cutted demos don't.

i mean, here: http://imgur.com/MMoBa86 you have screenshot from game i recorded couple days ago and i cutted that part with frag and it still works, but i have older demos from november or december with cutted frags and there utf8 is not working. Some bug?

Edited by dehumanizer at 11:46 CST, 30 January 2016

<< Comment #389 @ 10:52 CST, 31 January 2016 >>

(Link, Reply)

By

brugal - Reply to #388

I don't think it'll be possible to get the older cut demos to work since the demo network protocol also needed changes to support utf8. The old code would convert non ascii (<128) chars to dots for security reasons and with the cut demos that conversion already took place.

<< Comment #390 @ 13:51 CST, 31 January 2016 >>

(Link, Reply)

By

dehumanizer - Reply to #389

ah ok, thx anyway!

<< Comment #391 @ 23:48 CST, 20 February 2016 >>

(Link, Reply)

By

illiterate

is there a command which shows when players are zooming?

many thx in advance

<< Comment #392 @ 00:47 CST, 21 February 2016 >>

(Link, Reply)

By

AsphyxEvents - Reply to #391

cg_zoomScaling "0" (0/1) toggles the zoom in/out animation

<< Comment #393 @ 01:24 CST, 21 February 2016 >>

(Link, Reply)

By

illiterate - Reply to #392

no such command in wolfcam :P

<< Comment #398 @ 08:00 CST, 22 February 2016 >>

(Link, Reply)

By

brugal - Reply to #391

cg_useDemoFov protocol 91 transmits player fov values and this can be used to view the demo using the players fov or to try and detect zoom changes. Note that zoom isn't transmitted in the demo so it is detected using a fov change. This will lead to a problem if the player uses a config that changes fov (ex: per weapon). Values (0: ignore demo fov (default), 1: use player's fov, 2: detect zoom changes)

3%

<< Comment #399 @ 08:22 CST, 22 February 2016 >>

(Link, Reply)

By

AsphyxEvents - Reply to #398

yo brugal.

you have a solution for this problem ?

following folder : wolfcam-ql -> models -> weapon2 -> plasma

i made my own plasma.png but it appears just the default plasma texture

all others like railgun/rockets etc running without problems ( i just replaced the old jpg`s or png`s)
:(

Edited by AsphyxEvents at 08:22 CST, 22 February 2016

<< Comment #401 @ 08:50 CST, 22 February 2016 >>

(Link, Reply)

By

KittenIgnition - Reply to #399

Have you tried using tga instead of png?

Even png works for me :(

Was "weapon2" a typo on your part, or is that what you actually named the folder? The name of the folder is weapons2 ;)

Edited by KittenIgnition at 08:55 CST, 22 February 2016

<< Comment #402 @ 10:21 CST, 22 February 2016 >>

(Link, Reply)

By

AsphyxEvents - Reply to #401

didnt work for me, always the default one :(, yeah it was the weapons2 folder

Edited by AsphyxEvents at 10:22 CST, 22 February 2016

<< Comment #403 @ 12:15 CST, 22 February 2016 >>

(Link, Reply)

By

KittenIgnition - Reply to #402

Dunno then, I created everything from scratch as I was writing that post. It worked without issue on a fresh-ish install.

<< Comment #409 @ 03:03 CST, 24 February 2016 >>

(Link, Reply)

By

brugal - Reply to #399

Can you post the console logs somewhere? /demo demo1.dm_91 /condump log.txt
Might be a conflict with a custom pak or model.

<< Comment #404 @ 23:38 CST, 22 February 2016 >>

(Link, Reply)

By

illiterate - Reply to #398

thanks for clarifying that brugal

<< Comment #394 @ 03:19 CST, 21 February 2016 >>

(Link, Reply)

By

AsphyxEvents

then isnt supported in the newest test14 version :)

<< Comment #396 @ 16:07 CST, 21 February 2016 >>

(Link, Reply)

By

lee.ql

i can't change frag message size and font...
help me plz

<< Comment #397 @ 04:16 CST, 22 February 2016 >>

(Link, Reply)

By

AsphyxEvents - Reply to #396

seta cg_drawFragMessageScale (this controls the size of the drawn text)

seta cg_drawFragMessageFont "fonts/yourfonts.ttf" ( create a fonts folder when you havent it )

Delete your q3.config aswell from your wolfcam folder for changes. best way is using an autoexec.cfg

Edited by AsphyxEvents at 04:24 CST, 22 February 2016

<< Comment #400 @ 08:49 CST, 22 February 2016 >>

(Link, Reply)

By

KittenIgnition - Reply to #397

You forgot cg_drawFragMessageSeparate ;)

<< Comment #406 @ 15:33 CST, 23 February 2016 >>

(Link, Reply)

By

lee.ql - Reply to #400

image
how to remove this?

<< Comment #407 @ 17:11 CST, 23 February 2016 >>

(Link, Reply)

By

KittenIgnition - Reply to #406

I don't think there is a command for that, sorry.

<< Comment #405 @ 07:45 CST, 23 February 2016 >>

(Link, Reply)

By

lee.ql - Reply to #397

how to remove the inscription that appears when someone enters or leaves the match in spectator?

<< Comment #408 @ 00:43 CST, 24 February 2016 >>

(Link, Reply)

By

AsphyxEvents - Reply to #405

i think that cvar, but not sure : cg_drawSpecMessages 0/1 ( Draw messages to the spectator HUD )

when iam recording a demo and something disturbs me. ( my hack in 3 ways )

1. pause the demo -> short cg_draw2d "0" command in that milliseconds -> back to cg_draw2d "1" for fragmessage text :)

2. pause the demo -> short cg_drawCenterPrintFadeTime "2" command in that milliseconds -> back to cg_drawCenterPrintFadeTime "200" for normal fragmessage fade :)

3. pause the demo -> short cg_drawCenterPrint "0" command in that milliseconds -> back to cg_drawCenterPrint "1" for normal fragmessage text :)

1.a : cg_draw2d 0/1 //Displays HUD elements.
2.a : cg_drawCenterPrintFadeTime //How long it takes centerprint messages to fade off the screen.
3.a : cg_drawCenterPrint "1" //Draw centerprint messages such as frag messages.

Edited by AsphyxEvents at 01:43 CST, 24 February 2016

<< Comment #410 @ 03:10 CST, 24 February 2016 >>

(Link, Reply)

By

brugal - Reply to #405

The simplest way is to set 'cg_serverCenterPrint 0'. Another option is to set both 'cg_drawFragMessageSeparate 1' and 'cg_drawCenterPrint 0'. With the second option only frag messages are drawn in the 'center print' area so you will lose things like round status messages.

<< Comment #411 @ 08:36 CST, 24 February 2016 >>

(Link, Reply)

By

lee.ql - Reply to #410

thx dude

<< Comment #412 @ 09:49 CST, 24 February 2016 >>

(Link, Reply)

By

lee.ql

How create frag message like this?
image

Edited by lee.ql at 13:24 CST, 24 February 2016

<< Comment #413 @ 15:37 CST, 24 February 2016 >>

(Link, Reply)

By

brugal - Reply to #412

Sorry, that one isn't possible, cant add new lines or change font settings in the middle of a string. Probably added to the video afterwards.

<< Comment #417 @ 16:17 CST, 27 February 2016 >>

(Link, Reply)

By

lee.ql - Reply to #413

how fix legibility text frag message ?

IMAGE

<< Comment #414 @ 16:19 CST, 24 February 2016 >>

(Link, Reply)

By

lokaria

Any way to make bleeding when hit work with last version?

<< Comment #415 @ 04:31 CST, 26 February 2016 >>

(Link, Reply)

By

brugal - Reply to #414

For 11.0test14 change the wc/bloodExplosion shader in wcmisc.shader to:

wc/bloodExplosion {
nopicmip
cull disable
{
animmap 5 gfx/damageq3/blood201.tga gfx/damageq3/blood202.tga gfx/damageq3/blood203.tga gfx/damageq3/blood204.tga gfx/damageq3/blood205.tga
blendfunc blend
}
}

You'll also need to copy the quake3 models/weaphits/blood*.tga files into wolfcamql/wolfcam-ql/gfx/damageq3/.

The next version removes the wc/bloodExplosion shader and you'll simply need to copy the blood files into the damageq3 folder listed above.

3%

<< Comment #416 @ 08:21 CST, 26 February 2016 >>

(Link, Reply)

By

lokaria - Reply to #415

many thanks!

<< Comment #418 @ 13:54 CST, 28 February 2016 >>

(Link, Reply)

By

Clau

Hello, I have a question regarding client-item-timers. I decided to use WolfCam to record old Quake3 demos. And one of the advantages about that is that i can use item timers. But on a map like q3dm13 it shows me (next to the RA MH YAs) the quad-damage icon and a "0". But the mode played was duel.

q3dm13

Is there any way to "reduce" the amount if items that are shown on the screen? Like for example on a map like Aerowalk, I would like to see only the RA MH and YA timers, but not the green armors.

Thank you for the work you have done.

<< Comment #419 @ 06:30 CDT, 26 August 2016 >>

(Link, Reply)

By

Owzo

Is this still the latest version of Wolfcam?

<< Comment #420 @ 09:58 CDT, 27 August 2016 >>

(Link, Reply)

By

*creep - Reply to #419

http://esreality.com/post/2806213/wolfcam-11-0/