i dont got a config for u but heres my buthols lmfao
#bumblecrumb

(_o_)

http://www.file-upload.net/download-4617540/config.rar.html

cheers

I'm looking for high fps one. I set everything to lowest in menu and I wonder if I can get anymore by adjusting minor cvars like in quake. It's 100+ unstable now

Lowest isn't always the fastest. Ye, it's strange but, lowest in Warsow is set up for old 3dcards which don't take advantage of fragment shaders nor VBOs. If you have a modern card you'll get a faster configuration by tweaking medium profile than by using low profile or turning everything off. If you set gl_ext_GLSL to 0 you lose huge hardware speed ups.

I don't get any speedup by toggling gl_ext_GLSL. Any reference? I don't feel like testing all cvars.
I have intel GMA 4500MHD card (supports opengl 2.1 but it's very slow).

try fps config -> http://www.mediafire.com/?jcdqj4u4c6s6q72

Thanks adem, works great for me. Had a little fps issue before but it's fixed now.

Here is mine with all the needed cvars organized in subcathegories plus my crosshair-pack.

Very stripped down and focused on visibility. Can do 300fps on my Athlon 64 X2 6400+, GeForce 9600GT and 2GB DDR2-800 RAM with 1680x1050@120Hz.

You need to change stuff like name, resolution, sensitivity and weapon-settings/binds. Also if your game doesn't want to start after you have put in my autoexec, just change s_module form 2 to 1 that should make it work again.

Here is a screen of my config:

Thx man this will help alot :D

Amazing config, helped me turn off a lot of BS I wouldn't of found otherwise.

$$$

Actualy a very nice config ty man! By the way QL is caped at 125fps, are you saying that Wsw can be caped at 300?

Warsow doesn't have a fps-cap afaik. FPS don't affect the physics in Warsow, so theoretically you can have 700 fps if your PC is good enough. But almost all players cap them at 125 or 250 fps because you don't need more.

Ty. You know what is the commad to cap it? The game is realy superb and (for me on my setup) way more smooth than QL is. I am happy about that 1.0 ;)

cl_maxfps "xxx"

Me cap fps at 150, couse my monitor uses 75hz.

if you monitor uses 60hz, you can cap at 60/120/180/240/.. fps for better synchronization of fps and hz =)

Could you tell me the command to cap the fps?

cl_maxfps <x>

Here:

http://gr1.atw.hu/cfg/WSW.jpg
http://gr1.atw.hu/cfg/ger1_wsw.cfg

Knock yourself out ;D

Edit:

I also have a HQ version:

http://gr1.atw.hu/cfg/HQ.jpg
http://gr1.atw.hu/cfg/ger1_wsw_hq.cfg

Don't get why you are using r_drawflat and picmip at the same time but ok. If I were you I would reconcider your hud-choice a bit. The warlord hud is cool but the defaut and clownfart ones are way better for serious play.

Well I've just finished the config hence that lil mistake (corrected), and I was using a custom hud up until 1.0, (qwarsow) but it fails to display chat messages now, so fuck it.

You can have brightskisn in Warsow?

Did not know that. What's the command?

Cheers.

You configure in the menu the models, skins and colors you want for team alpha and beta. If you check the box "force my team always to alpha" (somthing similar) then your oponents will be always displayed as whatever you have configured to beta.

EDIT: The map colors will also change to whatever you have configured for the team colors (in team modes like ctf, ofc, no point in bomb or ca).

seta cg_teamALPHAcolor "255 0 0"
seta cg_teamALPHAmodel "bigvic"
seta cg_teamALPHAskin "fullbright"
seta cg_teamBETAcolor "0 255 0"
seta cg_teamBETAmodel "bigvic"
seta cg_teamBETAskin "fullbright"
seta cg_teamColoredBeams "1"
seta cg_teamPLAYERScolor "bigvic"
seta cg_teamPLAYERSmodel "255 0 0"
seta cg_teamPLAYERSskin "fullbright"

Yeah but what jal said, easier.

we need to pimp yo QuakeWorld
VROOOOOOOOOOOOOOOOOOOOOOOOM

Im starting to get aroused ! :P

They just like to show off :P

fps drops from 125 to 20 when there is some action even in 1v1. Haven't seen such unstable fps in any game. fps heavily affects mouse sensitivity. Under linux I get this shit: http://www.esreality.com/post/2280030/mouse-i...der-linux/
I got few segfaults too.

Meanwhile in ql: stable 125 fps on maps like tox, playable 4v4 tdm with fps 100+ and drops don't affect sens. q3 engine looks the same on on low settings and better on high.

Warsow engine is more closer to Doom 3/Quake 4 engine. So, no need to compare QL and Warsow.

but still, you can try my fps config - http://www.mediafire.com/?jcdqj4u4c6s6q72 :D

Closest comparison would actually be source engine :)

I still got my old config from Bobel somewhere, unfortunately it's for Warsow 0.4 so I have no idea what will happen if you try and implement it in 1.0. Just to put it in perspective it reassembles this config http://i.imgur.com/Tk2u6.jpg

do not try to use your old config from 0.4. Engine has been changed a lot from those times.

Btw, in Warsow 1.0 it is easy to make a look like in your QL screenshot:
r_drawflat "1"
r_wallcolor "100 100 100"
r_floorcolor "100 100 100"
r_lighting_greyscale "1" (makes all lights grey)
r_lighting_vertex "0" (needs for r_drawflat's working)

Much appreciated, this will make some players very happy

i prefer:

r_drawflat "1"
r_wallcolor "65 105 225"
r_floorcolor "218 165 32"
r_lighting_greyscale "0"
r_lighting_vertex "0"
r_gamma 1.5

/Just sharing\

how does one get that kind of graphics in ql??

http://www.esreality.com/post/1950022/high-vi...pid2095781
Hope this helps you!

is there something like cg_lightingstyle in wsw?

What does cg_lightingstyle do?

changes lg beam in q3/ql

there's cg_lgbeam_old, for the old lg style

Oh, ye, then wha Lorfa said. I think the beam image is not pure so you probably can make your own. Not sure about that, tho.

The lg-gfx isn't pure so ye you can make your own as you want. There is a pretty decent one from adem I think (?) that you can download somewhere in the official forums.

cg_lgbeam_old "1" turns the beam-gfx back to the old one, which is basically only a straight lane without the two small lanes like in the current one and is colored with your model/team color.

Turns it into a better one you mean :P

Depends on your personal prefference. I don't hate the new one for instance but I still use the adem-one cuz I like it more.

how can i make my own lg beam? there was a config thread on wsw forums and i saw this: http://i.imgur.com/cX0Cy.jpg

how i can make lg look like on this pic? he posted gfx: http://i.imgur.com/lqNVs.jpg but i got no idea how to change it :<

rename it to laserbeam.jpg and put it in basewsw/gfx/misc (create gfx/misc) and make sure your cg_lgbeam_old is set to 0 :-)

thank you kind sir, have a plus :D

as WTFProoF sad, i've made one =) check it out here:
http://www.warsow.net/forum/thread/t/204867

Only one I found was cg_lgbeam_old 0/1

yo allz

ive found a nice 'trick'. i downloaded wtfproof?!'s custom crosshairs and noticed they were the same as qw ones.

by adding http://www.mediafire.com/?9cuphrtxjcgq85d in your "Warsow 1.0\basewsw" you will find a few new crosshairs by default, and by adding further content from http://gfx.quakeworld.nu/browse/crosshairs/ you will find even more.

adding qw crosshairs is just open wtfproofs?!'s .pk3 and add them in the "gfx\hud", u might also have to rename them "crosshair4", "crosshair5", etc.

btw does this mean QW huds will work also >D

Don't think the huds will work.

The crosshairs are plain tga-images made by me, so basically any tga-image with transparent background will work as a crosshair.
HUDs on the other hand are scripts written in a special syntax that is unique to Warsow (I've written QL huds myself and the syntax is completely different).
However you can take the images from your favourite QW-HUD (as long as they are tga-ones) and implement them into a warsow HUD without problems you just will have to make the folder structure right and write the HUD yourself (or modify an existing one).

yarr, i was being sarcastic D:

Could have been an honest statement tho :)

na not really :D

yo guy!! i was wondering if u are able to remove the long horizontal lines on http://gfx.quakeworld.nu/details/175/plaz2-crosshair/ for me? D: all i know is paint, and its not too kind to transparent spots

I could if I were at home right now. But unfortunately I'm on vacation at a friends house so I can't do it from here. You could however just install Gimp and do it yourself it's really not much work.

okay, cool. havent used gimp or any photoshops before, but i guess i can figure it out =PP thanks

I'm also working on my custom crosshair right now, so let me help you with it:

http://rghost.net/39525585

However, I did not find any long horizontal lines :) so I deleted long vertical ones.

Is it working?

its great! thanks man

actually, the crosshair is a tiny bit left of the center :l downloading gimp atm, gonna see if i can correct it myself. found the same thing for a few other qw crosshairs also =PP

okay, some maccgyvering and 30 min later its centered \o/

qw huds won't work
warsows hud language is different to ezQuake's hud language. ezQuake uses hud_* commands, warsow uses a scripting language for the huds.

I wrote config my autoexec, can't find it. Where does it put it?

%APPDATA% in the window address, Warsow1.0/basewsw

You can also go through windows start menu, Warsow 1.0 -> Advanced

awesome, thanks.

do you know of any external game browsers that work with warsow?

I don't know, There used to be some, but I don't know if they are still there (and I guess they will have to get updated to 1.0 if they are). You can use the online one at the website, tho.

post screenshots ffs.

Anyone knows how to get clown hud's weaponlist to the side?

+1

http://i.imgur.com/OExwO.jpg

http://www.upload.ee/files/2563689/huds.rar.html

Should work.

thx :D

Made another with the new items:

http://i.imgur.com/x3W20.jpg

http://www.upload.ee/files/2564248/huds2.rar.html

Edit:
I added the arrow to show me which side of the scoreboard is mine :). To remove it, go into ...\Warsow 1.0\basewsw\huds\inc\clownhud2, and overwrite the old file with this http://www.upload.ee/files/2565224/scores.hud.html

looking good, mama

This is SO much better! Will use it with mine hud.

i cant see new items :<

ok nvm i got it D:

You have to edit the HUD script.

quick start: Go to <install directory>/basewsw/data0_10.pk3 and extract the huds directory from the pk3 to %APPDATA%/Warsow1.0/basewsw

So now you have all the installed huds in your home directory and can edit them. Do never edit them inside the original pk3.

Locate clownhud.hud and open it with a text editor. You'll see a list of included hud script files. Easiest way now would be to locate a different hud with the weaponlist the way you want it, and include that hud's weaponlist file in clownhud (yes, you can combine files from different huds as you please).

Or you can script the weaponlist the way you want. Here's a starting point on hud scripting (wiki is VERY slow, be patient):

http://oldsite.warsow.net/wiki/index.php?title=HUD

Is there a full cvar list and what each cvar does anywhere?

I'm afraid the only explained list is in the wiki and it's very outdated.

You can get a full list by typing cvarlist in the console, but without explanations.

Also note that cg cvars won't be listed unless cgame is loaded, so you have to be in a match to get it all. Same goes to g cvars (you have to be hosting a match) but I don't think you are looking for those anyway.

http://oldsite.warsow.net/wiki/index.php?title=Main_Page

as it says, it's kind old.

Try /cvarlist
also use /cvarlist *keyword* if you're looking for something specific, so an example: /cvarlist *bright*

try the #warsow channel too and ask around and the warsow forums. i know clownfart had a nice config and hud that was very user friendly for people, just dump your own binds in.

btw, is there a way to alter zoom sensitivity?

seta zoomsens "0" apparently :)

It if hasn't changed:

zoomsens <value>

with 0 it autoscales to match your normal sens. A value forces it to whatever you want.

i have HUGE negative accel :/

win pp off, tried in_mouse, have accel fix, in quake all is fine.

anyone can help?

m_dinput m_raw

anyone know how to turn of marks from shots?
just like cg_marks in quakelive.

thanks in advance

cg_decals

much thanks jal

Question about the LG gfx. Is the thin, solid line in the middle something that is always there? http://i.imgur.com/NcaKS.jpg
I've tried a couple variations of it, but I always get that line. What I used in the pic above is this. http://i.imgur.com/ZC64K.jpg

do you have a tga image?

http://www.mediafire.com/?8gb4g4icxq7lcc6

Thanks.

doglike

The LG beam are 2 polygons crossed in perpendicular. The "thin line" is the vertical polygon seen from the side ;)

I see. Thank you for the info!

Is there truelightning equivalent in wsw? I find it hard to aim lg without it. Also does it do fov/widescreen scaling the same as QL? Or does it do it similar to Q3 (stretch 4:3 to 16:9)

truelighting equivalent is enabled by default. I don't recall if it can be disabled at all.

EDIT: Forgot the fov thing. Yes, FOV auto-addapts to widescreen as in Q4.

Using WTFProoF's config, so I don't have truelightning :[

What's the command for it?

cg_predictLaserbeam , its useless tho

not so useless. cg_predictLaserbeam 0 feels more comfortable on >60 ping

What do you mean?

In 1.0 the LG is allways cg_truelightning "1" style...

:( I want lg curve

tbh, me too. Strong ammos only looks boring and too CPMish =( they broke the game!

They did not.

do not want strong/weak ammo

no thanks

Don't confuse the graphical effect with the hit detection. In Warsow the curved laser beam hit detection matched the graphical effect, it was drawn curved and it touched people following the curve.

At Q3 with truelighting off the gfx was curved, but the hit detection was still straight. It was simply a bad representation of the beam.

With cg_predictlaserbeam 0 you disable the "always straight" drawing of the beam so it's drawn lagged just as it was at Q3, with the difference that our gfx is one line so it doesn't curve, but still points in angle to the lagged position.