I think its dead..

It's dead, jim.

meh :)

fed up with this crap - second HDD to die on me in 6 mnths

Maybe 'tis time to get that NAS unit with RAID 5 that I have been eyeing up ;)

or maybe not since the times of raid 5 are over (average failure rate is like 1 bit in 1 TB which means you most likely have 1 error in every drive = can't recover the data if one drive in the raid5 dies = raid5 is worthless)

also that *click* means a headcrash -> fubar


-KekS

depnds on luck and how much the data is worth.

But yeah, I wouldn't send it to the experts for some random porn.

Nothing major on there just movies and game install files .... oh and *cough* a smidgeon of questionable material ....

BER of 1E-12 sounds good

use a magnet

Is it a Barracuda 7200.7?

Haven't checked the specs yet but I think it is yes ... (bought it some time ago)

Oh right I can't help then :)

Who else knows a fucking serial number based on nothing more than a model name and you cats wonder why I think so highly of myself?

If it is, I just wanted to tell you that I have several of those drives and they have all failed with spectacular consistency with the same problem you are posting.

It won't help get your stuff back, but it should stop you from buying another. Try a Samsung Spinpoint F2 or F3.

it's 5 fucking numbers you idiot

7200.7 is not a serial number, you dimwit.

I have some of you wound up so tight you have a mid life crisis when I mix up a serial with a model number on a sodding disk drive.

And you wonder why I wind you up?

Here's another one.

DO NOT CLICK THE UNHIDE BOX OR YOU WILL BE SORRY.

the only person you have wound up is yourself

Well that pretty much explains how you justify your stupidty.

ah ok, so you claim you are much smarter than us for memorizing a serial number, even though it actually a model number, and when you get called on it you are still super smart and we are dumb?

Yeah, that makes sense.

Don't forget that it was the wrong model number. Us cats really should think much higher of this far superior being.

Wow you're so impressive. Especially considering the fact that the max capacity for 7200.7 is 200gb.

you fail

I have a dead sata drive too, but 750 gig. It gives me the "bad drive" error when I try to boot up with it plugged in, and if it does successfully boot up, it will just freeze windows after a few minutes. Is it totally dead or any chance of fixing it?

tried plugging it into another pc, yet?

best procaution you can take is to just boot up from a different hd and copy the data on the broken hd onto something else (the boot hd for example) and then go on search ;)
You might want to rebuild the MBR (after! you done the above) and see if it still crashes ;)

yeah i've done that and formatted (it wasn't my main drive to begin with). What is MBR?

master boot record... but if you formatted it that wouldn't matter anymore (because as far as I know that also gets removed and rebuild with a format, but I'm not a hd expert).

dont buy a cuda if they have a back plate covering the pcb, they over heat and only last a few months

not sure if they're oem or retail, weston digial drives are the same

low level format, or flashing the hdd's bios ? (but I guess if the mb's bios doesn't see the disk, these utilities under dos won't neither ?)

that's what i thought too ... fubard if BIOS says nein !

checked the cable? my drive has a terrible connector and the sata cable that came with my mobo doesnt fit very well, i replaced it and the drive was fine

tried difft cables :(

I read that putting the HD in the freezer for a while can temporarily resurrect a dead harddisk.

I read this too on the internet. If it works, try and get as much data off there.

Worth a try - it's dead anyhow :)

can just use a single molex to power it, having a splitter for a fan etc can stop any drive working correctly if your psu is getting old

if you're on waffles make a post and ask lordshaft for a reply

you'll probably not understand 90% of his tech-blurb but you'll get the best and most detailed answer you can hope for.

Let me guess, it's a 7200.11 or ES.2 (most likely ST31000340AS)? Unless you update the firmware the Barracuda has a 40% failure rate. Meaning it will work fine for a while but then brick itself.

Fortunately if that is the case, you can send it in to Seagate and they provide free data recovery. The data itself isn't lost, it's just locked. See http://www.docstoc.com/docs/19904816/urgent-field-update

And yes, the drive sucks which is why it is so much cheaper than any other drive of similar size.

cool, that explains why everything fucking barracuda drive I had and other peoples have died. Noted!

Yes, if you read through it you'll notice that basically every time you boot you have a 1 in 256 chance of bricking the HDD. So it's bound to happen sooner or later.

Never heard of such a terrible design in my life.

Or perhaps its just awesome. A product for a gambler.

they were thinking something like this when they tested it and actually deployed it to the market?
"This product will run perfectly fine. but 1 out of 256 activations it will produce a gun and shoot you in the face instead of it's normal routine"

I was playing some roulette last year and guy next to me was getting quite raged. I looked over...



Poor bugger was betting close to 80 pounds a spin and RED 34 kept coming in. I felt his pain :)

So this drive issue does not surprise me. Only a matter of time.

where did you get 1/256 from?

The problem can only occur if a power cycle initialization occurs when the Event Log is at 320 or a multiple of 256 thereafter. Once a drive is in this state, the user will not be able to resolve/recover existing failed drives.

So if the event log is at a multiple of 256 when a power cycle initialization occurs (boot or reboot), the hdd will shut itself down permanently.

barracuda drives have 2 boot sectors, 1 as backup, your suppose to be able to get a warning tool if the first has failed, never found it like sm